www.imoc.co.uk

Mapping been done, this is just a safe map so it can be run in more

285bhp @ 230pft @ 10psi

Just got to go collect it, looking forward it it

this is not going a power mapping session, its more to tune the aftermarket ecu. so much has been done to this its no where near standard, even tho the base map was tweaked for all of the changes, this was not done on a dyno. since running it ive not had it over 5k on 8psi (750miles), so this sessio...

its been a log journey to get to here. tomorrow i'm dropping my tubby of at the tuners and getting the car setup :D 2 to 3 years of buying engine parts, waiting for parts, parts not fitting or just the wrong part. hopfully after this setup wont need to look at this for a while \:D/ next part is pain...

I've not posted for a while or had the chance to log in. I have been running the MR2 in the last couple of weeks slowly. its now hit 500 miles. going to look to get in mapped in the next 200. I forgot how much i missed driving it.

Good morning All,

I was hoping that someone may know where i could take my MR2 to get its front arches cut/rolled or flared or combination of all 3, I was looking for somewhere around the stoke-on-trent area or close too?

Drove the MR2 back from the garage last night. ill upload some photo's tomorrow just need to give it a quick wash/wax

Good news, Ive just gotten back off my holiday and my MR2 has been completed and is stilling waiting for me with a fresh MOT. left todo list, Needs mapping needs respray (this can wait for a bit in case further work is required.) thanks for reading guys, ill update with some new videos and photo's, ...

Good news, success engine is now running good. can go for an MOT next week, then i can take it for mapping shortly.

p.s little bit of a you tube video, slight whistle in the throttle body still looking into whats causing that.

https://youtu.be/MQxTsiFoTMk

Just a quick update. Everything is wire back up, most of the inside of the car is back inside. seem to be having a throttle vac leak, need to play around with that this weekend, I was having issues with the ECU (aftermarket) seems a software update has ironed these out. almost there!!!! more picture...

clickable versions

Everything has power and is getting the correct reading, engine was off in these photo's https://s22.postimg.org/o4yyo58t9/IMG_1973.jpg https://s22.postimg.org/xfb2rojj1/IMG_1974.jpg https://s22.postimg.org/eygo0v3kt/IMG_1975.jpg Need to tidy up the positions etc, im also having a debate with self, ...

Sorted the throttle cable out, new cable and a custom plate:-







Just need to get the gauges finished off this weekend. more to come soon.

everything is pretty much back in the 2, hit one small stumbling block, waiting for a replacement throttle cable to turn up. Current one does not meet my throttle linkage.

Plan is get this fitted on Saturday. then the car will be ready for its MOT.

Good afternoon all,

My builds ready but my throttle cable is not long enough to reach my racerX centre feed inlet manifold.

Looks like its going to come up short by about 7-15cm's. I have a standard gen2 cable, Is the gen3 cable longer?

Keys in, turned key, engine started success!!

still cant go for a drive need to finish off wiring the gauges and put the seats back in.

got the wide band wiring installed on its own relay, I needed to get the car up in the air, there was another car on the ramps last night so didn't get around to installing sensor, gauge is all working. With not been able to get the sensor in, I decided that I would do the same for the all of the ot...

powered coated them & re-polyed everything.

Before bushing

Also need to do something with the throttle cable.

wiring is finished, Power steering mod before was causing my problem. Laptop is reading all sensors correctly form the ECU, Going to try and turn it over tonight. Need to install my wideband, Had to get hold of a relay, I have this now i will turn it over tonight. fingers crossed it turns over :D go...

I'm still smashing my head against the wall with this wiring issue. ](*,) ](*,) ](*,) I think it must be somewhere in the passenger loom. Need to work out what items on the pass loom have powered items @ key turn to IGN. I get the feeling stray voltage maybe coming from one of these items. Good news...