www.imoc.co.uk

SuperRed, out of interest how much did it cost including postage? What sort of gains will you see from it? I'm interested in getting one as my clutch needs changing soon (although) it needed changing soon four years ago and has been fine since. lol Would obviously make sense to do both at the same t...

I would imagine some fibre glass sheet and resin should do the job. Or you can normally get a replacement off ebay quite cheap.

Yeh i did Ollie, took close to 4-5 weeks in total, after the original turn around of 4 days. When i got it back it didn't fit back on. After lots of phone calls and emails ended up sending my old standard exhaust to them so they could line everything up. Would have been a lot sooner had said exhaust...

Had my MOT yesterday.... Passed with 2 advisories. 1) small oil leak which i knew about, still trying to track the location of the leak 2) nearside rear wheel bearing has slight play. Tester said to just put a bit of grease on it and it will be fine. So all together very happy, all the recent work h...

have sent you a pm

Thought that was the case. thanks

Are the shock inserts interchangeable between 1a and 1b? i.e kyb, koni etc? I have a 1b and think they are off a 1a, would they fit?

Right just been out to have a look, firstly the handbrake is still fully working, obviously something is not 100% for it to be making this noise so more of a precautionary step to try and locate the issue. Max i did as you suggested, it took a while to get it to make the noise in the first place, bu...

Mine is my daily aswell! Hence my surprise to find these little things lol

Will try that later and will post up the results, cheers Max

My MOT is due end of the month so i thought id adjust the handbrake as it has failed on poor efficeincy (little or no effort) the last two years. I followed the previous topics on this; Slackened off the cables from the adjutment point Removed cables from caliper Wound piston back in then back out 1...

Really? lol ill try that later! I wonder what other little surprises are in store?

Mine is a MK1b and they are a grey/black colour, but i like them.

I found that the side bolsters on the seats adjust! lol I now have them fully in and they feel so much better. Car has also been treated to some tlc all 99% of surface rust sorted and all arches undersealed. Getting there...

Nice little drive round MK Hopefully my exhaust will turn up wednesday and ill be doing something very similar.

When they received the exhaust back they put it on the jig and it was as they made it, so no damage in transit, although they did suggest that was the issue. When i get through to them, if they have had no luck ill just have a go at bending it myself when i get it back just didn't want to invalidate...

Cheers for the photo Unleash comparing the two pictures side by side it would appear that the other hanger may be slightly out, along with the slight angle on the right one, which as Paul said could be bent back, but when you pay a reputable company to carry out work you shouldn't have to then start...

Cheers Coanda. Paul, you cant tell from the picture above but they have put the hanger too far towards the rear of the exhaust, if i were to bend the hanger im not sure it would clear the grille. Maybe this picture will help show this; http://i196.photobucket.com/albums/aa202/mlhs16/SNV34659.jpg Goi...

Right where do i start? A couple months back my Janspeed split in the weld, so i put my standard exhaust back on, this however then broke so went back to the Janspeed and it gradually got worse till about 3 weeks ago i took the car off the road whilst sourcing a replacement. Bought a Magnex off Ebay...

Hi Jimi, Should have just pm'd you as i thought you would be the man in the know lol Although not 100% thats the part number im after. Did a few google searches and i think the number is 90467-00002. Will go down to Toyota in the week when the exhaust is back on to make sure i get the right parts. C...