www.imoc.co.uk

I thought that on rev 3's it's the MAP sensor that controls fuelling all the time. To confirm this, at idle, pull off the MAP sensor plug, ecu will overfuel like mad and it will probaly stall, and you'll smell fuel from the exhausts. By comparison, unplug the lambda sensor and not much will happen. ...

I'd love to come on this if there's any more spaces please Frank, checked and not working, so would love to come, been a while since last Imoc airfield day in area, (Bentwaters)

Andy

Now am I pi$$ed off :evil: :evil: Just been told I have to work a nightshift next saturday night, :cry: tried to argue against it but apparantly if they give me >7 days notice I have to do it. So it looks as if I'm going to have to give up my place, as I think I'll be too knackerd to drive down from...

I needed to bend the pipe on my rev 3 to get the size of pipe on I needed. I found the best way was to heat the pipe with a plumbers blowtorch and then bend it. I also used a 15mm pipe bender insert thingy to stop the pipe from creasing. And yep I also had to grind off the leg, also remove some hard...

Adam, I think you're getting confused to which part is the turbo, it ISN'T the silver block in your pictures, that's the intake plenum, the turbo is over the other side of the engine. Pic 3 IS NOT directly into the turbo, it's into the inlet plenum. Jim's correct when he says that a gauge will read ...

Adam, I think you're getting confused to which part is the turbo, it ISN'T the silver block in your pictures, that's the intake plenum, the turbo is over the other side of the engine. Jim's correct when he says that a gauge will read differently when connected to the turbo, because the intercooler c...

How about this one:

http://cgi.ebay.co.uk/UNICHIP-PIGGY-BAC ... dZViewItem

You could of had it for a quid maybe...doesn't look as if anyone bid on it, was up for a week with no bids.

Andy

I bought a version A unichip, (what u need) off ebay for 55 quid, was from a 200sx I belive, and fitted it myself. Unichips go regulary for under a ton on ebay, you havn't got to buy one that was used b4 on a mr2, the mapper will probaly write a blank map into it first thing anyway! If you can join ...

there we go

Sorry!, I'm on holiday trying to view imoc on my pda on the room balcony, stealing some spaniards wifi,
everytime I switch it on it seems to redo the last thing i was doing!

Sorry!, I'm on holiday trying to view imoc on my pda on the room balcony, stealing some spaniards wifi,
everytime I switch it on it seems to redo the last thing i was doing!

oops repost

Dunno mate, something like a boost leak on the actuator line, or the wastegate catching or not opening correctly? You should still have the protection of fuel cut around 18.5psi, thats if you haven't done anything silly like fit a fcd to a rev3 ? nice turbo anyway, hope u get it sorted soon, lucky b...

Agree, do the swapout yourself and you'll save thousands.

I did my rev 3 for <1k, a little more than the £750 rear cut, see the writeup in knowledge base engine section.

regards
Andy

If you take the lid off the top of the ecu, the pinouts are written on the pcb in silkscreen print. (well is on mine) get a piece of paper and copy down you're own diagram, the benefit being it's exactly correct! I've got all the correct books for mine, but I still had the lid off to confirm! regard...

unichip boost control module & a blitz ebc in operation together on a rev 3?:shock::shock: :-k 1.2 bar should be ok, but not any more, and with good fuel, optimax etc, I ran/run it ok . clive will check egt/lambda and also listen with det cans during time on the rollers so he'll confirm. have yo...

double post,again

double post, damn Ipaq

, i belive the boost module is there so you can run more boost , i was running 1.6 bar with my blitz ebc and the dastek/boost module you are buying cheers carl I hate to think what was going on there mate :D you cant really use 2 different methods of boost control at the same time! The boost contro...

I got a few exa bhp and a lot of extra midrange torque
clive know his stuff and whats good is that he goes over the car making sure its fit b4 he starts work.
then 1st job is a 'before' power run.

fit the ebc first and have a play.
fit and map the unichip after all your mods are finished.

Andy