www.imoc.co.uk

Try this link

http://www.apexi-usa.com/pdfInstallation/12.pdf

I found everything I needed on here.

I could write a book on my embarrassing moments
Still no harm done and I've learned a lesson

Did this trip take place?

1.munnsy (dave)
2.caribbean_blue (reece)
3. DavidM (David )

Yep for 26th Oct

sorted
must remember anticlockwise to undo
If I'd lay under the car I would have sussed I was going clockwise

welsh_mr2_kroozer wrote:i wonder if the captive nut in the chassis has come off...

Don't think that would be the case as the bolt is as stiff now, after say 2 or 3 turns as it was when I started

Yes, been using a breaker bar, I can get the bolt to move but it doesn't seem to be getting loose.

Maybe I need 3 weetabix

I'm changing my ARB bushes and after reading what was required I thought..... Easy. However, I'm having difficulty undoing the 4 crossmember bolts :oops: I've soaked them in WD40 over the last 2 days and I can get them to turn but the crossmember doesn't seem to be budging and the bolts are still ve...

Thanks Jeff but I have a feeling that is for rev 1. On the same section it says tighten shocker absorber hub bolts to 255Nm, on the later version it was changed to 173Nm.
Hence my confusion

Looking in the BGB under the rear shock absorber section there appears to be a different torque setting stated.
On the exploded diagram it says 73Nm, whilst within the text is say 30Nm
Does anybody know which is correct?

I'd guess the bearing located in a rear hub that connects to the tie-rod, long shot but could be.

Have a read of these threads from our American friends, which explains that the spherical bearing is not available without buying the hub :( They do mention a similair bearing but there is a diameter issue for the bolt :? http://www.mr2oc.com/showthread.php?t=104015&highlight=play+rear+tie+rod h...

While I was fitting my coilovers I noticed that when you grip the rear tie rods and rotate them slightly (like revving a motorbike) they knock. My passenger side knocks louder than the drivers side but they both knock :? Is this normal? Perhaps if anyone has got a couple of spare minutes they can gi...

......... the system is potentially open to abuse by sellers who know they are likely to recieve negative feedback. By not naming the buyer they also guarantee that they won't recieve negative feedback. Patrick Patrick, that is a very relevant point. I wouldn't like to think that members of this fo...

Mine are that tight, that you really need to "hammer" then in. So it does seem that something is worn and not creating the tight fit required.
Or........ someone keeps nicking them.

On my recent renewal
6 months £101.75
12 months £185.00
HTH

gtr2 wrote:So my question is; Do I listen to him since he built my engine or do I stick with the old school ways and put in mineral oil

Well you trusted him to rebuild your engine, so trust him now

Nathan at Century Motorsport in Kidderminster is all I can think of.

Wouldn't it be better to drive up and down the high streets in the Middle East as they are responsible for the current increase in fuel prices