www.imoc.co.uk

How about a standard exhaust?
that will be quieter

if you wanna swop/ px let me know

You're not far now! Don't give up Extactly what i was thinking when i got the bolts off the supports to the cat but, tis a shame as i have!! :evil: :oops: :cry: everything is back on the car but at least i tighten the handbrake and sprayed a heat sheild :? so not a complete waste of time might give...

I just thought i would give some credit to the people that have removed their cats from their Turbos themselves i have been having a go at removing the cat from my turbo and have decided to GIVE UP!!!!!!!!!!!!! :evil: I can not believe what Toyota must have been thinking when they put the support br...

As well as being a recirc valve, the valve will bypass the turbo to an extent when off boost- this helps fuel consumption by making it easier for the engine to draw air in without having to deal with the restriction of the unspinning turbo blades.

ahh, yes
now i understand

cheers guys

jamie

but it sounds like its doing it when cruising
at low vacuum/ trottle part open

do they do this?

cheers jamie

Hi i have just fitted a HKS SPF filter to my rev 3 turbo but it seams to make abit of a funny noise , abit like a coughing/barking noise when you lift of the throttle at low boost only does it once each time i lift off the throttle i think it might be something to do with the air from the dump valve...

Hi, is the standard dump valve meant to open when the engine is driving along in a vacuum (not on boost) its a rev 3 turbo because i get a whooshing/ whistling sound from the dump valve , like its openingwhen the throttle is part open and driving off boost is the standard dump valve knackered??? is ...

i have just been out and done a few hard stops! and after the first 1 or 2 the brakes because much much better!!! :D the bite improved no end, and the feel was better too i am thinking that they might be a aftermarket/uprated pads they are light blue in colour on both front and rears are nearly new ...

Hi On my 1994 rev 3 turbo the brakes are ok, and they work but at higher speeds they dont fill me with confidence and lack bite, they brake and shave off the speed but the feel isn't there is this a characteristic of the turbo? the pads look almost new and so do the discs (not lip on them at all) th...

is gutting the cat an option?
or should this be avoided?
will the MOT be affected on a 1994 rev 3 turbo?
is there any adverse affects of gutting/decating? (eg fuelling etc)

thanks
jamie

Sorry i should have mentioned its a rev 3 turbo

so its ok to decat on a stock turbo exhaust
just thought i would ask, as i would have thought it would knacker the baffles and make them rattle.

has anyone done this?

whats the benefits of decating?
faster spool up? etc

thanks
jamie

hi

as the title says

would this knock the baffles out on a standard exhaust?

has anyone done this?

thanks

ECU is located in the rear boot, behind the boot carpet on the engine wall. to the left side you will have to take out the plastic rivets/clips on that side of the carpet , just take a small screwdriver and push the centres in alittle and the clips will release and pull the clip out. then pull the c...

Hi i have got this problem the mirror just moves up and down and not left and right its my passenger one thats the prob i am sure it did work when i picked up the car i can't hear the motor at all when doing left and right, but can when doing up and down so its not the motor! and the switch is fine ...

Hi

can someone tell me how to
remove the front bumper??

or is there a website with the info on

i have a 1994 rev 3 turbo if it makes any difference

thanks

jamie

its really bad knocking/rattling/tapping (what ever you want to call it) over bad roads, but on A roads it is fine yesterday i gave the rear antiroll bar a good tug and it looks like there is alittle play in that and the little knocking noise that produced sounded very similar to the front knocking ...

thanks guys

was a bit of a nice supprise to find these hiding away

jamie

thanks

i have just checked on fensports website and i think they are TRD ones
front and rear are 22.2 mm and are white

http://www.fensport.co.uk/partsfiles/sw20chassis.htm

does this mean that the bushes are more expensive to replace???

jamie

Hi, i have a knocking/tapping coming from the front of the car, its a Rev 3 turbo on stantard spings and shocks as far as i can tell. i have looked at the droplinks and given them a really good shake/wiggle and took them off and looked at them, and they seem fine the ARB bushes look ok and don't see...

Hi

Can anyone tell me the standard diameter of the front and rear roll bars
of a 1994 Rev 3 turbo??

I have just measured mine
Front= 22.5mm
Rear= 22mm
they are bothe white in colour

is this right?

thanks
jamie