www.imoc.co.uk

Hi all, I was driving the car and forgot to close the bonnet properly and the wind forced the bonnet to lift all the way up (I bricked it as i thought the windscreen is about to smash). As a result the bonnet is now slightly bent as well as the plastic section just below the windscreen (where the wi...

Hi all,

I have had my HKS SSQV Blow off valve for over a year and for the first 6 months it was fine but now when i accelerate or de-accelerate, i hear the hissing noise constantly.

Have you ever run into this problem before? Could it be the O ring that has gone?

Thanks,
Pez

Hi all, One day i was driving and notived that when i accelerate i can hear hissing sound as if the BOV is letting air out. I have checked the pipes and i can not see anthing unusual. At the moment when i accelarate or de-accelerate i get the hissing sound. In terms of power, the car if fine and no ...

Hi all, I was driving the car last weekend and noticed that the dump valve is not making much of hissing noise anymore. I Ignored it and drove home. In the morning i drove the car again and noticed the same thing. So i parked up and and reved the engine to see if a pipe is disconnected but i notice ...

I bought my MR2 about 3 years ago from a guy who was friends with this guy. This MR2 looked good before because everything was standard apart from the Alpine sign at the back.

What has he done to it?!!! Get pimp my ride on the phone NOW!!!!!

Woohoo!!! Awesome!

The car is in a good condition since i look after it and service it regularly.

The only problem it has is the speedometer which I will be fixing in the near future but my MOT is due and I want to get it MOTd.

Will i pass MOT if my speedometer does not work?

Surely if a mechanic can not diagnose a problem for months as you suggested, then he can not exactly be a good or experienced one.

You are doing the right thing asking around on this forum and i would definatly recommend tubbies.

He is based in Flamstead (St. Albans).

Luke is the guy who did my rev3 conversion and he did a fantastic job. He is very good. In that case, Luke it will be.

Thanks guys.

Hi all,

How much will i have to roughly pay to get a garage to fit a downpipe to my 2?

Thanks

cantfindausername wrote:29psi(f)
32psi(r)

The above setting is good as i currently have 32 front and 34 back and the car bounces round corners when going in small road holes as well as having not enough grip (the main grip problem is having Nankangs).

why are nankangs bad?!!! Just curious.

I know, i know. The wheels came with them and i have not bothered changing them. Might be my next thing on the list.

what tyre pressure do I need to use for front and back wheels on my tubby?

The tyres are Nankangs on 17 inch alloys.

Thanks

intercooler/chargecooler and downpipe, you would also need to change the boost safety cut off/fuel cut, set at 18 psi. tbh a chargecooler would probably give you better results but the ct20b has shown itself to be unreliable beyond 1.2 bar, both creates to much heat and can shatter and therefore po...

Hi all, I own a rev 3 turbo with Apexi GT exhaust, Airl filter (bought from Rogue - can not remember the name), HKS bov, EBC and NGK Iridium Spark Plugs (grade 7 - Cooler Grade). I am currently on 1.2 bar (17 Psi). What other mods do i need so that i can up the boost a little safely? Thanks :thumleft:

Nice one Nick.

Have you got one on yours? Where did you get it from and how much?!

I can officially say that i have the modding bug AGAIN!!

Excellent. I will get it done on mine next month.