www.imoc.co.uk

Took mine off ages ago. Only takes 5 mins, so if your going to replace drop/lift your engine not hard to bolt it back on.

My original oem wind screen wipers didnt lift at all. But my new halfords ones fail to wipe the middle of my windscreen, eye level, at anything about 65mph. Might invest in some oem ones again.

Mine did this. It was the connector, that had erroded away and was shorting out. Is easy to change the sender, 3 screws and it just pulls out. However if its the connector it only comes attached to a whole loom from toyota that costs a fortune. So second hand and soldering it on is the option i took...

Be up for this. Sounds fun.

Is the Rear seal kit refered to as the caliper fitting kit? PN: BCF1329. Nothing called a seal kit. Guessing the condom shaped packet is the piston seal?

That bit needs to get T'D into the bit that is just below the diagnostics port. Will have a black pipe running into it. Just T into that.

My Clutch pedal seems to be 1/2-1 inch higher than my brake pedal. Not getting any slipping that i can notice but should it be that high? Sure it hasn't always been this high, but cant rightly remeber as never paid it much attention

Got told my rear brakes were sticking when my car was mot'd. So replaced the pads as they were low and greased them up about 4 weeks ago, looked fine, checked them and no sticking. Started getting some vibration in the rear on the weekend so had a look and it has eaten the drivers side pad to about ...

Depends whats wrong with it as to the price. If its just seals then its going to be a lot less then if the whole thing needs replacing internally. My ct20 was completely toasted, need new seals, shaft, bearings, wheel, the works, turbo technics quoted me £587 to do it. So i decided to spend the extr...

Or just pull over at the next convieniant place and let him go past. Why risk him slamming into your ar$e just to prove a point. Just let the idiot go and carry on with your journey in peace.

Use halfrauds 5.1 to. Seems great.

Yeah i will have to get myself to one. Plan it in advance and set it in stone. lol.

Be happy to go to porstmouth, must be a few owners there. Only 15-20 mins from chichester. Just guildford is a good 35-45 mins away. Never really have the free time to do it. Would love to however. Evening meet would be cool. Be available from 7-7:30 onwards. But would be cool to get a few of us tog...

Theres loads of guys portsmouth/southampton side, but dont think there is many our side. Seems to be a massive gap of 2's inbetwen portsmouth and guildford area.

Search for the MR2 work shop manual on here full workshop guide to doing it. If the belt has come off completely than you need to remove the ac drive belt first as the alternator belt goes behind it. If you look under the car your see the pulleys and were its supposed to run. The tension is all dont...

Closes one to us at the moment is the Guildford meet. Bit of a trek though. Dont think there is that many of us though, Like myself, you and Krismoyse.

lol. Thanks. Yeah i work in partridge green, so its my daily commute back to barnham. Second time i've been spotted by someone not in their 2. lol.

Cool. Wish i had a flare. Although probably best i dont for my own health and safety.

Is that what the 2 plastic C shape clips are for?

A24? Heading towards washington roundabout? If so that would be me.