www.imoc.co.uk

FOUND ONE, would delete this topic but unable to - thanks


Mk3 drivers inside door handle

Hi,
does anyone have one of these for sale please?

Can I get a ticket on the gate? not sure if it's going to be for just the 1 day or 2. Any ideas on cost please and is the event from Friday night to Sunday?

Hi, was thinking about changing the ball joint that are attached in the suspension knuckle. I'm being told by Toyota that they do not sell them on their own and they come are part of the knuckle £240+. Does anyone if I can remove the exisiting ball joint from the knuckle and more importantly what ca...

It's a 2002 model and yes it does have different wheels with spacers. 4 Wheel geo alignment carried out by a motor sport company. I've checked the tyre pressure and it's a little high, so will alter this. I'll be changing n/s front wheel hub as the bearings seem a little dry. I'll be changing front ...

who did th egeo set up? sounds like you need 4 wheel alignment, not just your crappy 2 wheel alignment most places do. ilogik, thanks for the reply. it was the 4 wheel alignment i had done. The wheel bearings seem okay, no play, and I will now change the disks and pads ( both of which look okay, ve...

Hi,
apart from the OEM part, has anyone bought and could recommend a cheaper alternative please?

Regards
Paul

bluesmoke wrote:It's just a normal thread mate

EDIT: I was referring to the castle nuts on the MK2. Can't imagine MK3 is different?

all done, normal thread as you say - thanks

Hi,
is the castle nut, where the steering rack ball joint attaches to the suspension, have a normal or a reverse thread?

Hi, when driving between 44-52 MPH, my sterering wheel rocks/wobbles from side to side. Slight pull to the left but not under breaking. Below and above these speeds no problem. I've had an all 4 wheel geometry check and each wheel balanced, but still have the problem. Any idea what else it could be ...

thanks. just found the website that supply the product and yep loads of brace combinations available.

If you're after bracing go to MR2ROC and search for a chap called aaronjb, really good friend of mine who is splitting his incredibly well-sorted Roadster now. He's got the full set of Web 3.0 Racing bracing still up for grabs I think. Piece of cake to fit, all just bolt on. I've heard of the Meist...

Assuming you can get them for £600, then I'd got for either the Tein SuperStreets or the BC Racing ones. That said, I'd only go down this route if you've already fully braced the car (front FSB and TTET cross brace as a bare minimum) and put a set of thicker ARBS on there too, as they'll make more ...

Hi,
I'm thinking of upgrading my suspension to adjustable coilovers. Can anyone recommend a good product please. I don't use the car for track days/racing and have a budget of around £600.

Regards
Paul

CTP (Cheap Toyota Parts) or a Toyota Dealership. And consider replacing all 4, unless that one only sheared because of a force put upon it which you are certain has only ever been put on that stud. Wheels have been known to come off at speed due to sheared studs, so better safe than sorry frogger, ...

Hi, 1 of my 4 rear hub bolts that hold the wheel one has sheered off !! Can anyone tell me if I need to change the whole hub or just the bit that has the bolts going through it. And if so, how do I replace it. Step by step guide would be good, with photos would be even better - thanks. Paul I now k...

Hi,
1 of my 4 rear hub bolts that hold the wheel one has sheered off !!

Can anyone tell me if I need to change the whole hub or just the bit that has the bolts going through it. And if so, how do I replace it. Step by step guide would be good, with photos would be even better - thanks.

Paul

Hi, while changing my disc/pads noticed that one of the gators on the driveshaft is split and needs replacing. There are two gators on there, it's not the one nearest the wheel, it's the other one nearer the middle of the car. Excuse the incorrect tech terms :oops: Is there a step by step guide anyw...

Ekona,
thanks, thought I'd check just in case

Hi,
I want to change the front and rear brake pads myself. Does anyone know if there is an idiots guide to show how best this should be done.

I'll be using MR2 stock pads but if anyone can suggest any suitable alternative I'm all ears.

Any help would be greatly appreciated.

Regards
Paul

sust it, loose battery connections - thanks for your replies