www.imoc.co.uk

Excellent!! Thank you for the response

I'm replacing the bulbs with 501 smds which seems easy and if the results aren't as good I will try LED strips.

I don't have the car as it's been worked on....so hoping to slot this in as soon as I get it back.

Cheers

Hello

I'm having a go at my heater control unit lighting mod and need to get a power supply to test it....does anyone know what Amperage it needs to be?

Thanks

I then took 2 of the same bulbs and removed the blastic holder at the bottom, then took heater control apart and fit these inside, soldered the legs of the bulb directly to the heater circuit board, and also had to modify the light reflector to get the bulb to fit but you can see the light spread i...

The best LED-job I've seen by far....congrats

I bet you will be in great demand if you decide to put your skills to the market....oh and by the way let me know if you do

I then took 2 of the same bulbs and removed the blastic holder at the bottom, then took heater control apart and fit these inside, soldered the legs of the bulb directly to the heater circuit board, and also had to modify the light reflector to get the bulb to fit but you can see the light spread i...

Draven wrote:I have the EMS one in mine..

+1

There is another alternative by using led strips which I've seen gives great results. It's fiddly from what I remeber though...I'll dig out all info I have and share as I'm planning to give this a go in the coming months.

Go and see Luke at Pacific Works he's top man and actually very colse to you

Have this weird issue on mine. Relays, fuses all checked OK. The root of the issue has been found to be the whole stalk unit. Check each wire in the unit's loom. I had to replace mine so I now got it and will soon install. I will let you know how it goes.

What a disgrace! Brakes my heart to see an MR2 end up like this...

Is soldering leds on a strip the only way to get a better light spread in the heater controls? No smd type leds/bulbs that could do this without any other mods....?

Thanks for the feedback guys

Hello folks

After some research it comes down to these 2...which one you think is best to go for (using apexi power fc)
or any other suggestions....

Thanks

+4 for Pacific Works!

Cheers Luke

Thank you for all the feedback. I’m leaning towards the konis as I’m afraid that B6s may be too stiff. Now it is going to be a headache trying to find these rebuildable struts…if I’m not mistaken they were in 89-92 turbos…

Just tried....not allowed to post pictures yet

I need to change the complete unit that holds them (behind the steering wheel)....do you know if rev5 is any different to previous revisions?

Hi All I’m trying to decide what the best suspension setup for my 98 turbo is and want your help…I’m after a nice ride for road use but also good handling. The car will not see tracks but should be able to handle fast driving around town… I’ve pretty much decided on the springs – eibach pro-kit. Wha...

Hi there

Does anyone know a source to buy methanol or pre-mixed water/methanol?

Cheers