www.imoc.co.uk

Personally i hate seeing hoses that just dont look like factory in the pumper, solution get my own reinforced hoses made. I made one jig but its actually 2 hoses in and out of the radiator to save money. http://img718.imageshack.us/img718/9337/dscf6428l.jpg http://img269.imageshack.us/img269/4407/ds...

Ok now back to the intercooler set up. I bought one of the radiators from Rogue, it was dear at the time but mainly due to the AUD. I turned it around as the A/C pipes are different over here and made a few custom bits for the mounting. THE BRACKETS http://img693.imageshack.us/img693/7866/dscf5878.j...

FYI the Rotrex SC is of my car. There were numerous reasons why i went the SC route and especially the Rotrex. The Beams engine loves to rev and by design the SC is belt driven and the more you rev the more the power. Its very linear so absolutely behaves like a N/A engine. Awsome throttle response....

I've been told by the manufacturers and re-sellers that they are good for up to 500hp, talking to some of the other specialists I think they start to struggle over 400hp. For 500 - 600hp I'd say you definately want a bigger core :thumleft: +1 Dyno testing Simon's engine showed an upper limit of low...

My car has a Radtech and im at 500 HP with a SuperCharger.

The Bosch pump is small get a bigger pump Johnson M90. With one inch lines even better.

Your cooling efficiency is going to be determined by your intercooler and where its mounted.

What ever reason its saying i have to post more before i can post a URL ?

Once i can ill post a few pictures

Im here :) Any help required just ask. DO NOT GET RID of the air con. My heat exchanger is up front and actually i bought it from England. As suggested in the previous post. Man it was dear but that was because of the exchange rate at the time. I can go thru all the process if you like BUT first abo...

Anyone got a pic of the front of the head of the BLACKTOP/ maybe it can be machined so as to use the running gear of the RED TOP. There has to be enough aluminiium. Adding VVTi to the exhaust will NOT foul in the MR2 engine bay , its well clear.

URL=http://img706.imageshack.us/i/dscf6116y.jpg/][/URL]

Well right now the engine is nearly put together, I am waiting for the SC pulley upgrade to be machined. Should be in the car by first or second week of March. Then connect everything and off to the tuners. Hopefully ill be driving her by end of March

Hey Mandalay!!! Welcome to the club. ....Guys you might not realise this but you're looking at one of the most obsessive / well thought out MR2 installs on the planet here. Superb installation with absolutely no shortcuts taken! :thumleft: Thanks buddy. Thought ild post this section of my build her...

This is the bracket to hold the coolant for the A/W intercooler set up. I also put a bracket over the nipples that holds on the braket to eliminate any chance of bending. Also pics as it sits in my car. The shape of this 85 corolla water bottle is great :) http://img30.imageshack.us/img30/8598/dscf5...

Aluminium piping for my A/W intercooler set up. From the front to the back. Pic 1 from the air con expander tank side. This is also where the FERRARI compressor and air horns will be located Pic 2 the other side where the Bosch water pump will be located Pic 3 passing the frunk Then hose couplings t...

Here is the mould made.
Now i can make the finished article . Finally !

Here is a picture of the bottom of my car with the trays removed. Pretty busy under there with little room to add 2 19 mm aluminium/ copper pipes for my A/W set up. I could have run them outside the covers but dont like that idea, so the only option is to make new trays with a bump for the 2 pipes. ...

Installation of the Bosch water pump for my A/W intercooler set up. It sits just in front of or windscreen water bottle Used all stainless steel bolts. The bracket itself is cushioned with rubber feet to dampen the pump from the chassis You can see the 90 degree entry hose from my aluminium pipes. T...

New here . Thought ild show you how i ,ounted my preradiator for my A.W intercooler for my SC ROTREX set up. I bought it from Rogue so close to your side of the world. Couple of mods as our AC set up is a bit different Well its been a year since i made these brackets and bought my A/W intercooler ra...