www.imoc.co.uk

Hi, Can't help you with a ride out as im based in the midlands. I've had my Meister R's fitted for over 18 months now and they have been used through all weather conditions and with just a bucket of soapy water come up like new everytime when I clean them and still perform as they did when new. My c...

Hi mate,

I've used MJR Body Repairs on park lane in Kidderminster, they have done a top quality job on mine.

I used them for repairing a damaged Greddy front splitter and Greddy side skirts, replacing the sills on my car and the rear arches.

Adam

Top work from Cardhore once again on a set of wheels i thought were going to have to be binned! Sent the wheels away grubby and came back looking stunning! Very cheap considering some of the prices I got quoted of other companies and wouldn't hesitate to send any future wheels to him either! Kept me...

Good to hear you got it fixed mate!

Just got to wait for some sun to start enjoying the car now

Adam

Hi,
Yeah just pull it out, mine was seriously over fuelling and sounded just like yours, unplugged the afm and ran fine, luckily I had a spare one to fit.

Ran perfect again after fitting it.

Adam

Hi,

Do you have an afm?

Have you unplugged that for any reason?

Mine over fuelled badly when it broke and sounded just like that, easy way to find out if it, just unplug it while the car is running.

Adam

I should be able to make it

Attendee's

1. Adam aj.extreme
2. Vinp182
3. b4nk51e
4.Adam1989
5.
6.
7.
8.
9.
10.

Hi there, Could be many things, mine did this a few months back and it was the AFM that stopped working. Have you had any work done on the car in the engine where a vacuum hose could have been left off? I'd check that you dont have a vacuum leak somewhere rev 1/2s run rough if there is a leak. Adam

Id be interested in coming, only a 10 min drive for me and i know a few others that might come along aswell!

Hi
Should fit no problems with 3mm spacers then, 5mm rubs on the arch liner over severe bumps sometimes

Hi
I'm running ET35 8J rims with 215 40 17 tires and coilovers, they didn't rub but, there was only a few mm clearance, so i fitted 5mm spacers to make sure.

Hi guys Have searched but have been unable to find a definative answer. My car is lowered 40mm all round and i need new rear tyres, i currently have 235 40 17 falken fk452. Im happy with the brand but want to know will i be able to fit on a 245 35 17 without any issues. The wheels are 17inch 8j wide...

Hi,
i dont cover anything up. Normally i spray all purpose cleaner/degreaser all over aggitate a bit then turn the engine on and rinse it off, just dont direct high pressure water at anything like spark plugs, alternature,air intake or fusebox etc.

Adam

They are BA9S, just had to replace one of mine.

I upgraded to a SMD-LED board makes a huge difference

Ebay item number: 180747038661

Sounds like the rocker cover if its covering the alternator

Not a big job, get genuine gaskets and use gasket sealent on the corners as thats where they seem to leak, best get it done sooner rather then later otherwise you will end up buying a new alternator aswell

HTH

Adam

Yeah looks to me like a 3sgte to me aswell

Its a Rev 1 or 2 got a maf sensor

Hi matt77

i had the same problem as you, took the cat off to find that it had broken up inside and dropped onto the sensor burning the wires causing the light to be on constantly


Adam

www.imoc.co.uk/forums/kb.php?mode=article&k=146

There you go mate, photos aswell

Adam

Hi guys,
i think my knock sensor has gone i keep getting error code 52, will a Rev2 N/A knock sensor fit a Rev2 Turbo?

I have used the search but couldnt find anything that was helpfull

Many thanks
Adam

I have a pair of these fitted and i must say they did make a noticable difference over the standard units, i also think it makes the front look alot more modern. Adam were yours glass as well? Yes they were the glass ones, they look and feel really well made. If you want i'll try and get some pictu...