www.imoc.co.uk

Well if you DO have a Rev3 Turbo (as in your Sig) then you do not have EGR or a MAF, and the important Airtemp sensor is just behind the Throttle. The Rev3's have Larger injectors than the Rev1/2's and so the "Cold Start Injector" (electric choke) was not necessary. The ECU knows the engi...

Dizzy cap, leads and plugs is the first area id look into. Had this problem for ages :-k , turned out to be ignition leads even though when I tested them they "appeared to be ok :-k ", my car is coming up 20 years old and the leads were original factory Toyota leads lol “year of manufactu...

Steve-O 2007 wrote:well its quite damp / cold weather now so I would check all your ignition components for moisture. Pop the ignition leads off and see if they are damp

Before I left for work this morning I pulled all the leads off the plugs and all the bores were dry. How does the choke system work?

Hi I've got a rev 3 turbo with an intermittent problem that happens in the mornings. Early in the morning my car splutters between 2000 and 3000 rpm but if I floor it the car pulls well. If I drive in that range with minimal throttle it is quite bad, you can feel the car jerk around. Its got new plu...

I made custom stainless brackets for mine

You need this one...http://www.camskill.co.uk/products.php? ... 0s606p2719

http://www.camskill.co.uk/products.php? ... 0s608p2819

Cheers Toby

I'm running 235 falken 452's at the mo but when there warn out I'll be putting 245's on hopefully that will help.

Quigonjay wrote:any idea what power you are making mate?
seems a bit slow for a slightly modded rev3

SLOW! 13.6 isn't slow mate. I am probably running between 270 and 300 bhp.

kgx wrote:

Bone wrote:The new wheel has no air bag. Do you know how can I put the light out?

open the fusebox under the front bonnet and pull the fuse labeled ECU-B.

the light will go out.

Is that all that fuse is for? I don't want to disable anything else.

I wonder if you could use a resister to trick the car, thinking it still has an air bag?

The new wheel has no air bag. Do you know how can I put the light out?

My first go up the strip. Pretty happy with the results. With a bit of practice I should be able to knock it sown a bit

I've just got a omp steering wheel but now I need a boss. My car is a rev3 turbo with an air bag. Couple of questions... Will the momo boss cancel my indicators and will the air bag light come on? If so how do I put it out? Cheers. Been looking at this... http://www.dcperformance.co.uk/cheap/41892/t...

Ha ha yes mate

It bolts onto the other part that is already in the gearbox which gives it drive

Keep the apexi and get the recirculating attachment for the ssqv

Mate its easy to do and you don't need to drain the gearbox. I removed one of mine last week to do the cv boot. All you need to do is unbolt the ball joint, separate the shaft at the gearbox end (leaving part of it in the gearbox) 6 allen bolts, let it hang down the wipe off the grease take off clip...

How long did these take to get mate? Did you get stung on import tax?

http://www.mr-2.com/english/fm_frame.htm