Search found 163 matches
- Wed Aug 03, 2016 8:32 pm
- Forum: Electrical
- Topic: [Mk2] [NA] injectors not working..... help needed...
- Replies: 3
- Views: 2581
Re: [Mk2] [NA] injectors not working..... help needed...
hi I have inserted the dizzy as it should be, where the notches all align up etc etc ... The ignition lead sequence is run from the dizzy cap where the cap is numbered 1 - 4 and i have taken the ignition leads from 1 to spark plug 1, 2 to spark plug 2 etc .... the number one spark being at the front...
- Mon Jul 04, 2016 10:17 am
- Forum: Electrical
- Topic: [Mk2] [Turbo] Front Fogs blowing fuses!
- Replies: 1
- Views: 2064
hi
Just recheck your wiring making sure you have no shorts etc..... are you using a relay to control your fog lights ??
- Sun Jul 03, 2016 12:39 pm
- Forum: Electrical
- Topic: [Mk2] [NA] injectors not working..... help needed...
- Replies: 3
- Views: 2581
[Mk2] [NA] injectors not working..... help needed...
Hi there. I have just rebuilt my mr2 after replacing the head gasket. When I come to start the car it turns but dosnt start. I have checked the timing. it's as it should be. I have checked ignition leads.... all good. I have checked the sparks... all good. I even put some petrol into the manifold to...
- Mon May 30, 2016 7:41 pm
- Forum: Mechanical
- Topic: [Mk2] [NA] Starting issues
- Replies: 4
- Views: 1162
Re: [Mk2] [NA] Starting issues
Today, I have had a look at the timing. The cam shaft cover was removed and i checked everything was correct. The Cam shafts were in the correct position and the dizzy was inserted correctly so that the mark was aligned with the notch etc. Then the cover was replaced and everything put back together...
- Sat May 28, 2016 8:04 pm
- Forum: Mechanical
- Topic: [Mk2] [NA] Starting issues
- Replies: 4
- Views: 1162
hi
hi there
the timing is correct and yes it does come alive with you spray easy start in to the carb... but then it dies ....
the timing is correct and yes it does come alive with you spray easy start in to the carb... but then it dies ....
- Thu May 26, 2016 10:10 am
- Forum: Mechanical
- Topic: [Mk2] [NA] Starting issues
- Replies: 4
- Views: 1162
Re: [Mk2] [NA] Starting issues
Anyone ....????
- Thu May 26, 2016 10:04 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Whats best course of action..help please
- Replies: 20
- Views: 1884
Re: Whats best course of action..help please
I guess the only way you can tell what the engine output is, to put it on a dyno and take it from there.... otherwise its very hard to be precise on the performance and engine output.
- Thu May 19, 2016 2:01 pm
- Forum: Mechanical
- Topic: [Mk2] [Generic] Camshafts advice needed please...
- Replies: 2
- Views: 858
Re: [Mk2] [Generic] Camshafts advice needed please...
Hi there
As far as I am aware the cams are stock. I dont have any history on the car and cant really tell you what the previous owner did etc.
I can tell you, before the head gasket was changed, the car was running great and i had no issues with it at all.
hope thatr helps ??
As far as I am aware the cams are stock. I dont have any history on the car and cant really tell you what the previous owner did etc.
I can tell you, before the head gasket was changed, the car was running great and i had no issues with it at all.
hope thatr helps ??
- Thu May 19, 2016 9:57 am
- Forum: Mechanical
- Topic: [Mk2] [Generic] Camshafts advice needed please...
- Replies: 2
- Views: 858
[Mk2] [Generic] Camshafts advice needed please...
Can anyone give me some advice regarding my camshafts on my mr2 and its timing. I have a mr2, mk2 G-Limited auto - import. The head gasket has been replaced and i am just checking on the timing to get it right. According to the guides your cam shaft has a small notch in it that needs to align and ma...
- Sun Apr 24, 2016 5:57 pm
- Forum: Mechanical
- Topic: [Mk2] [NA] Starting issues
- Replies: 4
- Views: 1162
[Mk2] [NA] Starting issues
Hi there I need some help please.... I have a Mr2, MkII Glimited Auto. A few months back i took the head off and replaced the head gasket etc. Everything has been put back as it should be. The timing is as it should be also, where the crank shaft pulley is at Zero mark and the cam shafts are aligned...
- Thu Mar 03, 2016 10:02 am
- Forum: MR2 MK3 2000-2007
- Topic: Mk3 and tall people
- Replies: 7
- Views: 10548
ho
I am 6'5" tall..... i can very easily get in to my car - NO problems.... if your still concerned stick to a ford mondeo....
- Sat Jun 06, 2015 10:05 pm
- Forum: Electrical
- Topic: [All] [Generic] Toyota Radio Information
- Replies: 13
- Views: 18934
Re: [All] [Generic] Toyota Radio Information
hi sorry for the late reply
yes i managed to get the stereo fitted and its working well....
yes i managed to get the stereo fitted and its working well....
- Tue Sep 16, 2014 9:41 pm
- Forum: Electrical
- Topic: [All] [Generic] Toyota Radio Information
- Replies: 13
- Views: 18934
- Mon Mar 04, 2013 10:51 am
- Forum: ICE and Security
- Topic: [Mk2] [NA] Audio 3 amp active premium speaker diagram required
- Replies: 0
- Views: 954
[Mk2] [NA] Audio 3 amp active premium speaker diagram required
Hi
does anyone know where i can find a diagram for my sound system in my car.
The mr2 i have has an active premium sound system with 3 amps....
where can i get the diagram for that from ?
cheers
does anyone know where i can find a diagram for my sound system in my car.
The mr2 i have has an active premium sound system with 3 amps....
where can i get the diagram for that from ?
cheers
- Sun Mar 03, 2013 8:33 pm
- Forum: ICE and Security
- Topic: [Mk2] [NA] Once again... active stereo problem!
- Replies: 9
- Views: 2330
Re: [Mk2] [NA] Once again... active stereo problem!
forgot to say...... if your 12V+ was drawn from ignition your aerial would be up even before you had started your car and your amp would be on even before you switched on the radio / cd etc.... besides, you will get a loud thump from your amp when HU is switched on.
NOT professional method !
Cheers
NOT professional method !
Cheers
- Sun Mar 03, 2013 8:29 pm
- Forum: ICE and Security
- Topic: [Mk2] [NA] Once again... active stereo problem!
- Replies: 9
- Views: 2330
Re: [Mk2] [NA] Once again... active stereo problem!
You can do, but its NOT the best way. Its best to have the 12v+ switch coming from your head unit when the ignition on your car is turned on. Your head unit has to control the amp. A decent head unit will have an aerial 12v+ output wire and an AMP 12v+ output .... Just check and make sure thats all....
- Sun Mar 03, 2013 11:54 am
- Forum: ICE and Security
- Topic: [Mk2] [NA] Once again... active stereo problem!
- Replies: 9
- Views: 2330
Re: [Mk2] [NA] Once again... active stereo problem!
hi there it really depends on what OEM audio set up you have. If you dont have an built in amp then you can be certain that the HU has an amp built in. Otherwise if you have Amps built in then all your speaker wires will be comming from the power amp and also for the woofer, the wires will be coming...
- Sat Mar 02, 2013 10:34 am
- Forum: ICE and Security
- Topic: Speaker fitment / Wiring diagrams. please contribute!
- Replies: 82
- Views: 118602
hi
hi
is there a diagram for a 3 amp system ???
cheers
is there a diagram for a 3 amp system ???
cheers
- Sat Mar 02, 2013 10:23 am
- Forum: ICE and Security
- Topic: [Mk2] [NA] Once again... active stereo problem!
- Replies: 9
- Views: 2330
hi
Hi To start of with you ONLY need three wires. They are 12V+ Constant 12V+ IGN GND - These will give your HU a power supply. This means that you can switch on the HU and see if it works. Then you need the following connections...: Speaker wires. After that, the amp switch wire needs to be connected ...
- Fri Mar 01, 2013 10:35 pm
- Forum: ICE and Security
- Topic: [Mk2] [NA] Once again... active stereo problem!
- Replies: 9
- Views: 2330
hi
Hi there I am having a similar issue like you are .... well kind off... On my car there are three connector blocks. The first block is the audio and on that block the white wire is for FRONT LEFT + speaker The third block is the power block. where the voltage comes in etc... There the white wire is ...