www.imoc.co.uk

err not sure to be honest. I think its rev 2..... but how can i tell ??

The engine was already in the car, thats why i am not sure what rev it is etc ...

thanks.

Thats right. The issue is that with the 3sgte engine i would like to have the 3sgte display cluster etc and not really be using the 3sge (non turbo) cluster. When i do use the turbo cluster it dosnt work correctly, firstly, the turbo dial goes all the way up as this would be for the dial to measure ...

From what i am aware off..... the previous owner had changed the engine loom upto where the passaengers footwell is.

Now, i am NOT sure if the loom is standard from that point onwards to the display cluster or not ...?

Thanks

Can anyone help me please....? I recently changed my engine from a 3sge to a 3sgte engine. The loom was partially changed also. The issue that i am having at the moment is that i am using the old display cluster and it dosnt have the turbo boost gauge fitted in to it. And the 3sgte turbo cluster dos...

Some time ago i purchased a nokia n95 from ebay. Sent me the phone but it was a cheap copy from china... I tried contacting him etc - NO response etc. Ebay was rubbish at helping me. Ended up telling the seller that i will contact trading standards and the police.... Soon had a reply .... excuses up...

Contact the seller and tell him that if he dosnt resolve this matter asap you will be contacting TRADING STANDARDS and the police for selling fake crap....

9/10 sellers do reply at this point ...

Good luck

Hi sorry you are right... no carb, what was i thinking off....?? lol

I meant throttle body ....

sorry to have made a silly mistake..

Thanks

Thats one way to find out ....lol

I will see if i can find somewhere to try that.

Thanks

How can you tell if your gear box has LSD or NOT if the engine you have in your car has been changed...??

My original engine was a 3sge and now i have a 3sgte engine but am not sure if the gear box has lsd or not ??

Any ideas anyone ?

thank you

I need some help here, i am sure its nothing serious (i hope) but i still need to ask you guys... On my car when i remove the air pipe going to the carb from the intercooler there is traces of oil. I have traced this back to the breather pipe from the engine case that goes from the engine to the air...

hi

yes you are correct about the resistance needed for the circuit.

I have an old sump cover with the sensor on there so i will take that off and measure the resistance and use the apprioate value resistor to bridge the connector.

Will let you guys know what happens

cheers

thank for that.... i will have a look at it when it stops raining ...lol

cheers

Thanks for that.... just one last question.... What does the plug look like that is meant to be in the oil level sensor...? Is it a three pin or two pin plug...? is there a picture availiable ?? I was thinking of finding the plug and then bridging it with some wire, so at least the light wont come o...

Thanks for your replies...

what if i was to bridge the connecter so that the ecu thinks there is a sensor there and its all working well....?? would this have any effect on the ECU in anyway ?

Thanks

Hi there can anyone help me here please....? I have a toyota mr2 which was originally a non turbo - 3sge engine. I had replaced the engine to a 3sgte. The loom was changed etc and the car drives well etc etc I have no issues with it apart from...... The orange oil light comes on after 30 seconds of ...

hi there

thank you i just tried that and its working ok....

I think i will get the timing rechecked ......

cheers

Hi can anyone help me please. My car was working ok until i took the distibutor out to check for an oil leak. After that i checked everything before trying to reinstall the distributor - - Checked crank pulley was at zero mark - Checked that the cams were aligned to the notch on the back plate Every...

Hi thanks for your replies. I think i might know what it is that is causing the problem with the low engine oil light comming on after 20-30secs. Originally, my car had the 3sge engine and now it has the 3sgte engine. Now, i may be wrong when i say this... BUT, the 3sge engine had a connector going ...

Hi its the yellow oil light - the top up light.

Comes on after about 20 - 30secs after engine has started .

Thanks

djpkins..... yeah didnt i just get to the top of the friggin tree.... and then i fell out and bumped my head ....lol

Seriously, lesson learnt !