Hi,
As the 2 is in the garage for the winter I tought I would get on with a few mods...so I stripped the interior dash right down, fitted some speedhut dials, cleaned up a bit and re-fitted the dash. All the time being very careful with the intrument cluster.
On re-fitting and testing, everything works as advertised apart from the rev counter which now has the following symptoms....
On engine start....the needle will jump to 1k, but obviously has no life in it.
If you rev the engine the needle will not move, but if you tap the perspex, it will jump to the correct rev reading.
After allowing the revs to settle back down, the needle will stay at the high rev reading unless you tap the perspex again and it will, after several taps, work it's way back down.
I have taken it back apart, the rev counter has....no dry solder joints, con-checks fine all over, no undue resistance in needle movement, all screws are making the contatcs beneath, and I was very careful when handling the rev counter out of the cluster......running out of ideas.....is it just a case of keep using it and it will work itself free?
Please help!!!!!!!
Sticking rev counter.......
Anything to do with the electrics of the car.
Moderators: IMOC Moderators, IMOC Committee Members
Post Reply
1 post
• Page 1 of 1
Jump to
- Subscription Boards
- ↳ Premium Members
- ↳ Premium Member Discounts
- MR2 Boards
- ↳ MR2 MK1 1984-1989 NA & SC
- ↳ MR2 MK2 1990 - 1999 NA & Turbo
- ↳ Mechanical
- ↳ Modifications
- ↳ Electrical
- ↳ ICE and Security
- ↳ MR2 MK3 2000-2007
- ↳ MR2 Engine Swaps
- ↳ Events
- ↳ Past Events
- ↳ Events Discussion
- ↳ Event Videos
- ↳ TOTB - Team IMOC-UK
- ↳ Motorsport and Trackdays
- ↳ Spotted
- ↳ Member Profiles
- ↳ Project Cars
- ↳ International MR2 Clubs
- IMOC Shopping
- ↳ IMOC-UK Affiliates
- ↳ Adrian Flux Insurance
- ↳ Driftlimits Performance
- ↳ P Chambers Motor and Bodywork
- ↳ Opie Oils
- ↳ AIB Insurance
- ↳ ShineAuto
- ↳ Group Buys - MR2 related
- ↳ Trader Feedback
- ↳ Items Wanted
- ↳ MR2s for Sale
- ↳ General For Sale
- ↳ General Group Buys
- ↳ IMOC Shop
- ↳ MR2s Being Broken
- ↳ Mk2 Bodywork & Wheels
- ↳ Parts For Sale
- ↳ Parts for Sale (not Mk-specific)
- ↳ Mk1
- ↳ Mk2
- ↳ Mk3
- ↳ Parts For Sale By Traders
- Japanese Auto Extravaganza
- ↳ Past JAE Shows
- ↳ JAE 2008
- ↳ JAE 2009
- ↳ JAE 2010
- ↳ JAE 2011
- ↳ JAE 2012
- ↳ JAE 2013
- ↳ JAE 2014
- ↳ JAE 2015
- ↳ JAE 2016
- ↳ JAE 2017
- ↳ JAE 2018
- ↳ JAE 2019
- ↳ JAE 2021
- Japfest
- ↳ Past Japfest Shows
- ↳ Japfest 2015
- ↳ Japfest 2016
- ↳ Japfest 2017
- ↳ Japfest 2018
- ↳ Japfest 2019
- ↳ Japfest 2021
- General
- ↳ Off Topic
- ↳ Games Consoles
- ↳ Club News and Announcements
- ↳ Driving Experiences