[FINALIZED] Enkei RP01's

Moderators: IMOC Moderators, IMOC Committee Members

Locked
robbie_742003
Posts: 1167
Joined: Wed Dec 15, 2004 7:50 pm
Location: Midlands

Enkei RP01's

Post by robbie_742003 »

16" 114.3 PCD. Standard staggered set up, these are in good condition, but will need a refurb at some point. Good tread on fronts, just legal on backs. Collection only.
Can send pics on request.

£400
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: [FINALIZED] Enkei RP01's

Post by craig »

Widths, offsets and center bore of wheels? :thumleft:
robbie_742003
Posts: 1167
Joined: Wed Dec 15, 2004 7:50 pm
Location: Midlands

Re: [FINALIZED] Enkei RP01's

Post by robbie_742003 »

Will take a look tonight mate, where will it tell me the offset?
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: [FINALIZED] Enkei RP01's

Post by craig »

robbie_742003 wrote:Will take a look tonight mate, where will it tell me the offset?


Should all be on the back of the wheel, then just measure the center bore. Helps determine what spigot rings would be required.

offset should be shown as, for example "ET38" or "+38", and the width shown as "7J" or "7x16" etc :thumleft:
robbie_742003
Posts: 1167
Joined: Wed Dec 15, 2004 7:50 pm
Location: Midlands

Re: [FINALIZED] Enkei RP01's

Post by robbie_742003 »

Hi mate,

We got 16x7JJ and 35 offset
and 16x8JJ and 38 offset

Just realised I forgot to measure the bore, I'll do it tonight.

:thumleft:

Rob
robbie_742003
Posts: 1167
Joined: Wed Dec 15, 2004 7:50 pm
Location: Midlands

Re: [FINALIZED] Enkei RP01's

Post by robbie_742003 »

70mm on the bore Craig.
Feedback Bot
Posts: 6071
Joined: Wed Dec 15, 2004 10:16 am

Re: [FINALIZED] Enkei RP01's

Post by Feedback Bot »

This Sale has been completed. The Buyer was Non-Member
Locked

Return to “Mk2 Bodywork & Wheels ”