Rev 5 Spoiler Bolts

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
l1ca
Posts: 713
Joined: Tue Aug 06, 2013 10:17 am

Rev 5 Spoiler Bolts

Post by l1ca »

I've recently sent a Rev 5 spoiler away for repainting, now its back I cant seem to find all the bolts I need to put it back together ](*,) :roll:

Anyone know what size bolts are needed to fit the spoiler blade

These bolts:
Image
(I know about the strange pivot bolt, thats been removed prior and replaced, but I cant remember the size)

Also the end cap allen key bolts
Image

Thanks guys. Derp. :lol:
User avatar
wilkie senior
IMOC Moderator
Posts: 2057
Joined: Tue Feb 01, 2011 8:53 pm
Location: Barnoldswick

Re: Rev 5 Spoiler Bolts

Post by wilkie senior »

Hey my pic there of the spolier caps ha ha (well Wilki the younger when it was his)

Give me a moment I will check what the allen bolts are :-)
Image
That's a negative, Jim. I do not have the measles.
Hail Cosmos Eagle Rev 5, 1998 -
RIP White Eagle Rev 1, 1991 - 2016
User avatar
wilkie senior
IMOC Moderator
Posts: 2057
Joined: Tue Feb 01, 2011 8:53 pm
Location: Barnoldswick

Re: Rev 5 Spoiler Bolts

Post by wilkie senior »

bolts for spoiler caps


M6

Only short, 5mm to 10mm
Image
That's a negative, Jim. I do not have the measles.
Hail Cosmos Eagle Rev 5, 1998 -
RIP White Eagle Rev 1, 1991 - 2016
l1ca
Posts: 713
Joined: Tue Aug 06, 2013 10:17 am

Re: Rev 5 Spoiler Bolts

Post by l1ca »

Thanks! :clap:

Appreciate that

Right, that's them ordered, what about the inners / blade? I think I remember the head being 8 or 10mm? Not sure about the thread or length though....
thomp1983
Posts: 1545
Joined: Sat Oct 01, 2011 1:30 pm
Location: newark, notts

Re: Rev 5 Spoiler Bolts

Post by thomp1983 »

The gold coloured ones are 10mm heads m8 thread there probably 15-20mm long, jobs like this are why it's worth owning a Vernier but as I'm guessing you don't get something small like a cocktail or lollipop stick put it in the hole till it bottoms out, mark it and then measure with a ruler or tape then round down to the nearest 5mm for example a 22mm deep hole would want a 20mm long bolt.
shinny
Posts: 2345
Joined: Mon Nov 27, 2006 4:59 pm
Location: Reading, UK

Re: Rev 5 Spoiler Bolts

Post by shinny »

wilkie senior wrote:Hey my pic there of the spolier caps ha ha


And mine for the other photo... even hotlinked from my website :whistle:

Not that any of that is a problem :thumleft:
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”