See new thread

Cars being broken - please contact a member of the Committee or a Moderator before posting.

Moderators: IMOC Moderators, IMOC Committee Members

Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

See new thread

Post by Gullzter »

Regrettably breaking my recently purchased MR2 as my plans for it have been completely tossed out the window and haven't found a new home for her so hopefully I'll be able to save/upgrade a few fellow 2 owners with this.
Not everything is being sold as I'll be keeping a lot for my other 2, however feel free to ask about parts not listed and I'll get back to you.
List as follows for now:

*Rev2 turbo engine - PROVISIONALLY SOLD
*Greddy TD06 kit, Greddy exhaust manifold (rev1/2 gen2), downpipe and turbo (unknown mileage) good working order with minimal shaft play as expected - �850
*Greddy T67 kit, Greddy exhaust manifold (rev3+ gen3), downpipe and turbo (unknown mileage) good working order with minimal shaft play as expected (would recommend re welding the manifold as it's had a repair not to the best of standards) - Turbo SOLD, manifold and downpipe available - �325
*OS Giken super single clutch kit (clutch plate may need replaced but was fully working with no slip before removal according to previous owner) - �275
*Apexi GT exhaust (flexi has a few scuffs) - �275
*Greddy Type R BOV with hot pipe adapter - SOLD
*Greddy Type R wastegate with flange for screamer pipe, also have a new spring as a spare for it - �225
*Apexi PFC + Commander (AP engineering version so is compatible with gen2 + gen3) - SOLD
*Greddy side mount intercooler kit (smic, pipes, hoses, clamps, fan) - SOLD
*Greddy profec B spec II boost controller - SOLD
*Greddy full auto turbo timer - SOLD
*Lockwood white face speedo cluster with silver rings - �95
*Custom top feed fuel rail (rev1/2) + 870cc Delphi injectors - SOLD
*Rogue 255lph fuel pump - �50
*Aeromotive A1000 fuel pressure regulator - SOLD
*HSD monopro coilovers (unknown mileage) good working order - SOLD
*Tein front tension Rods - SOLD
*Cobra 6 point harnesses - �100
*Grooved discs - SOLD
*Rota boost 17" (exact spec unknown-hopefully know this weekend) with Falken 452 tyres (almost new) 215/40 + 245/40 - SOLD
*TRD style rear spoiler with carbon blade and end caps (needs attention) - SOLD
*Stock bonnet with Border vent moulded in - SOLD
*Stock rear bumper with genuine Border rear spats - �100
*Border copy skirts NEW (still in gel coating) - �75
*Custom rear lights with wolfie indicators and USDM corners and carbon centre panel - �125
*Stock side vents in primer - �30
*Alcantara door cards - �50
*Calipers + carriers - SOLD
*Stock Rev2 turbo intake manifold - �20
*Stock Rev3 turbo intake manifold - �50
*Stock Rev3 turbo fuel rail + 540cc injectors - �60
*Kappa infinity 6x9 speakers, crossovers and cubby lids cut out (they have seen better days) - �20
*Front clear flat indicators + rub strips (replaces toblerones - SOLD

Loads of other stuff so will add as I go along.
Breaking will probably start towards tail end of next week (ending 2nd April) onwards.
Prices are open to negotiation, collected from Glasgow however can post at buyers expense.

Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Any questions pm me :thumleft:
Last edited by Gullzter on Tue Oct 30, 2018 11:45 pm, edited 8 times in total.
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

List updated :thumleft:
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

Updated :lol:
johnsonca9
Posts: 18
Joined: Mon Dec 07, 2015 9:24 am

Re: See new thread

Post by johnsonca9 »

You don't happen to have a spare set of suspension arms knocking around?

I'm looking for a full set to strip, paint and polybush, but want to do the full set so I can swap all at once!

Thanks
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

johnsonca9 wrote:You don't happen to have a spare set of suspension arms knocking around?

I'm looking for a full set to strip, paint and polybush, but want to do the full set so I can swap all at once!

Thanks


I'll have the ones off this once removed, however it has tein tension Rods and they will be removed so I'll need to see if I have a stock set to supply with :thumleft:
Drop me a pm and we can go from there.
chaos19810
Posts: 400
Joined: Thu Apr 05, 2012 10:19 pm
Location: Bury st edmunds

Re: See new thread

Post by chaos19810 »

You didn't by any chance have polyurethane engine torque mounts?
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

chaos19810 wrote:You didn't by any chance have polyurethane engine torque mounts?


I'll have to double check.


LIST UPDATED
Xavier R3V
Posts: 41
Joined: Sun Jun 19, 2016 6:43 pm

Re: See new thread

Post by Xavier R3V »

Are you selling the stainless steel kickplates and plastic trim?
If so could you post more pics for condition and price?

Thanks
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

List updated, some more pics:


Image


Image


Image


Image


Image
tehdub
Posts: 54
Joined: Mon Mar 16, 2015 1:28 pm
Location: Reading

Re: See new thread

Post by tehdub »

Hi,

I am after the connectors for the speedo/gauge cluster.

I don't need the whole loom, just the connectors with about 6 inches of wire hanging off.

Any chance these are available, please?

Cheers,

Tom
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

List updated, all prices reduced to bare minimum :shock:

MAY take offers on some stuff to shift quickly, Friday 16th is the last day I'll be able to sell some stuff as it's all going into storage indefinitely for a few months.
Kordian
Posts: 6
Joined: Thu Jan 07, 2016 1:23 pm

Re: See new thread

Post by Kordian »

Fog lights?
User avatar
Tiamat
Posts: 10179
Joined: Mon Jan 24, 2005 2:02 pm
Location: Hailsham, East Sussex

Re: See new thread

Post by Tiamat »

Do you have the rear ARB and mounts?
I am going to live forever, or die trying!
Martin F
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: See new thread

Post by Martin F »

Tiamat wrote:Do you have the rear ARB and mounts?


Gullzter Is away living the dream in Dubai for at least a few months, It's all right for some :lol: 8) , therefore it may be a while until he can reply/send out parts.
User avatar
Tiamat
Posts: 10179
Joined: Mon Jan 24, 2005 2:02 pm
Location: Hailsham, East Sussex

Re: See new thread

Post by Tiamat »

Martin F wrote:
Tiamat wrote:Do you have the rear ARB and mounts?


Gullzter Is away living the dream in Dubai for at least a few months, It's all right for some :lol: 8) , therefore it may be a while until he can reply/send out parts.


Thanks, I did not know. As it is I may have a whole MK2 to strip soon anyway, so it might be a moot point
I am going to live forever, or die trying!
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

Sorry late reply :lol:

ARB already sold and no fog lights.

Back now so will update list if I remember what I have :eye:
dylan5084
Posts: 788
Joined: Tue Jun 28, 2011 10:53 am
Location: Oakley, dunfermline

Re: See new thread

Post by dylan5084 »

I'm looking for a pair of lsd hubs and a passenger side lsd drive shaft if yo have them?
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

dylan5084 wrote:I'm looking for a pair of lsd hubs and a passenger side lsd drive shaft if yo have them?


I've got a set of hubs (abs type) for you, won't be selling the driveshafts though, drop me a pm and I'll get back to you soon as I can :thumleft:
MrKrazie
Posts: 4
Joined: Sat Jan 21, 2012 3:35 am
Location: Los Angeles USA

Re: See new thread

Post by MrKrazie »

Pmd
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: See new thread

Post by Gullzter »

Got some stuff on eBay now, no clue how to upload pics on imoc now so I'll just link my eBay account here for you folk to have a look. Happy to take offers on most parts for imoc members :thumleft:


https://ebay.co.uk/usr/gullzter
Post Reply

Return to “MR2s Being Broken”