[FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Cars being broken - please contact a member of the Committee or a Moderator before posting.

Moderators: IMOC Moderators, IMOC Committee Members

kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Due to very unfortunate circumstancesost of my prize assets are being sold. Gutted is an understatement but needs must. So my mr2 is being broken.

Nearly all parts available and has some mods.

Rebuilt engine with 86.25 CP pistons, total seal rings, ARP bolts etc (done about 6000 miles) £1000. Runs fine but now out the car and needs a timing belt on it as I took it off to check water pump and oil pump etc before going to clean it all up and stick it back in the car.

ATS GT3076r turbo kit (fitted same time as engine was built) everything there to bolt onto a rev 3, you would just need new gaskets and bolts/nuts for adapter £1100

Sard fpr and braided lines £100

Rebuilt gearbox with lsd £300

ACT 6 puck clutch £40

Ebay sidemount intercooler kit with gts chris shroud and fan. £80

HKS Hi power silent exhaust in great condition but only have mild steel centre to go with it. £250

HKS evc5 boost controller £100

Innovate lc2 wideband and 4.2 sensor. Plug is slightly melted lol £60

Lots of other parts nearly everything available. Open to sensible offers on everything. Body panels are all great no rust and eveything works on car.

Only slight things are one rear light has small nick in corner and o/s/f caliper is sticking. Rear hubs and shafts and ecu are gone

Got nearly new genuine rear discs and pads also.

Pictures on request but I ask people to be patient as I am running a business too at same time as breaking the car.
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by Martin F »

what is the A/R on the turbo and what dumpvalve do you have ? :thumleft:
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by Martin F »

Ohh, and i know someone that is looking for 800cc injectors, i will message them :thumleft:
androo007
Posts: 2363
Joined: Mon Mar 03, 2014 1:43 pm

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by androo007 »

TURBO KIT PLEASE

EDIT:

Please can you confirm:

Mileage on Turbo
Any Shalf play in / out

Does it include everything in the ATS kit?

Cheers
Last edited by androo007 on Tue Oct 04, 2016 6:03 pm, edited 1 time in total.
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by Martin F »

androo007 wrote:TURBO KIT PLEASE DIBS


I was just about to dibbs it on your behalf, :wink:
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Sorry guys it doesnt have 800's they were sold last time it went off road.

Turbo i think is a .63 a/r but not 100% but deffo aint .82

Standard bov and 38mm tial rerouted back into the downpipe
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Inlet size fits the standard intake pipe also
androo007
Posts: 2363
Joined: Mon Mar 03, 2014 1:43 pm

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by androo007 »

Martin F wrote:
androo007 wrote:TURBO KIT PLEASE DIBS


I was just about to dibbs it on your behalf, :wink:


:lol: Sorry Martin I was just flying in caps lock 'n all going crazy didnt even see you had posted above!! :lol: Thanks pal
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by Martin F »

kev8611 wrote:Sorry guys it doesnt have 800's they were sold last time it went off road.

Turbo i think is a .63 a/r but not 100% but deffo aint .82

Standard bov and 38mm tial rerouted back into the downpipe


How much for the valve ?
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

As title mileage is 6000 odds. No shaft play in and out as its not that old and oil is changed every 2000 miles. Comes with everything needed to bolt onto the car. You will just need gaskets and nuts for adapter and the wastegate.

So its turbo, wastegate, adapter, downpipe. Oil feed and return lines with adapters, water lines

Yeah standard bov is fine £25 posted

Thanks
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by Martin F »

kev8611 wrote:As title mileage is 6000 odds. No shaft play in and out as its not that old and oil is changed every 2000 miles. Comes with everything needed to bolt onto the car. You will just need gaskets and nuts for adapter and the wastegate.

So its turbo, wastegate, adapter, downpipe. Oil feed and return lines with adapters, water lines

Yeah standard bov is fine £25 posted

Thanks


Ok, if it works fine with no leaks and has the rubber ring i will take it off your hands, can you pm me a photo of the whole unit and send me payment details, thanks :thumleft:
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Yeah works perfect. Will get pics in a bit
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Forgot to mention. Got a set of standard alloys that were refurbed in silver and are still perfect. Will leave tyres on them too
androo007
Posts: 2363
Joined: Mon Mar 03, 2014 1:43 pm

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by androo007 »

Thanks kev. Can you pm me your phone number please?

Cheers

Andy
markstevieandmads
Posts: 2025
Joined: Mon Aug 05, 2013 8:18 pm
Location: Swindon, Wilts

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by markstevieandmads »

Is the wideband still usable? If so can u pm me best price posted please
grega1
Posts: 40
Joined: Sat Sep 26, 2015 9:42 pm

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by grega1 »

hello, how much would shipping of the gearbox to slovenia be?
thanks
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Sorry bit if you want the gearbox shipped to there then i would prefer if you organised your own courier and I will package it up.
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by pbmr2 »

kev8611 wrote:Due to very unfortunate circumstancesost of my prize assets are being sold. Gutted is an understatement but needs must. So my mr2 is being broken.Nearly all parts available and has some mods.

HKS evc5 boost controller £100

Lots of other parts nearly everything available. Open to sensible offers on everything. Body panels are all great no rust and eveything works on car.

Pictures on request but I ask people to be patient as I am running a business too at same time as breaking the car.


Hi,

Would like to buy your HKS boost controller please.

Also could you do me a photo of the engine cover and rain tray please?

Thanks,
kev8611
Posts: 503
Joined: Fri Nov 15, 2013 12:08 am
Location: Scotland

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by kev8611 »

Hi,

Yeah no problem.

Pictures will have to wait until weekend though but its black, not damaged and everything intact....
almeida1234
Posts: 450
Joined: Sun Aug 15, 2010 12:48 am
Location: west sussex

Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's

Post by almeida1234 »

Any pics of the car bud?
Locked

Return to “MR2s Being Broken”