how do i fit boost gauge?? where are the wires under dash???

Anything to do with the electrics of the car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
jimGTS
Posts: 14024
Joined: Tue Dec 14, 2004 1:40 pm
Location: North Kent

how do i fit boost gauge?? where are the wires under dash???

Post by jimGTS »

SFLee
Posts: 1152
Joined: Wed Dec 15, 2004 12:29 am

Re: how do i fit boost gauge?? where are the wires under dash???

Post by SFLee »

by looking at the diagram

Grey wire is ur Signal wire
the T piece go in the Engine and tap into existing boost line
than to the recever unit (link to the grey wire)
+12v key is the acc wire either taking from stereo one(easier)
ground any
+12v dash lighting (for back light) I will take it from Cigrate lighting bit (for light at night) or just ACC (on all the time)

but depend where and how you mounted it, the hose dont look like long enough

I hope it help
jimGTS
Posts: 14024
Joined: Tue Dec 14, 2004 1:40 pm
Location: North Kent

Re: how do i fit boost gauge?? where are the wires under dash???

Post by jimGTS »

SFLee wrote:by looking at the diagram

Grey wire is ur Signal wire
the T piece go in the Engine and tap into existing boost line
than to the recever unit (link to the grey wire)
+12v key is the acc wire either taking from stereo one(easier)
ground any
+12v dash lighting (for back light) I will take it from Cigrate lighting bit (for light at night) or just ACC (on all the time)

but depend where and how you mounted it, the hose dont look like long enough

I hope it help


how far has the hose got to reach????
(its a electricallt boost gauge by the way).

also, where can i find some?? i measured the thickness of the tube i presently have, its 8mm wide, with a 4mm wode hole.
Post Reply

Return to “Electrical”