Trying to get my stero to work after i removed my electric aerial with an in car electronic one.
The harness was all over the shop, proper bodge job, mast never worked as it should it was turn key mast up turn key off mast down zero other control.
Anyway I get normal headunit opperation bar sound,.. the head unit has a lead AMP REM 0.3v that isn't connected, which pin on the toyota loom should i connect this too, i gather from other posts this should solve my problem.
1,4,7 or 12?
which pin for the amp?
Moderators: IMOC Moderators, IMOC Committee Members
which pin for the amp?
'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .
Re: which pin for the amp?
The signal from the head unit to acitvate the AMP is Pin 1
FYI See: http://www.ashworthonline.org.uk/mr2/MR ... Aerial.pdf
FYI See: http://www.ashworthonline.org.uk/mr2/MR ... Aerial.pdf
Re: which pin for the amp?
Ashy wrote:The signal from the head unit to acitvate the AMP is Pin 1
FYI See: http://www.ashworthonline.org.uk/mr2/MR ... Aerial.pdf
Many thanks pluged the cable into pin No. 1 and it sprang to life perfectly
Cheers
Steve B
'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .