Question for the SC owners - is there any other knock sensor that will work with the 4agze?
I am getting a error code 52 and I am unable to find a replacement, I have contacted Toyota and been told its discontinued, this is the part number I have 89615-17010.
I think it may be a case of holding out for a used one but I would be interested to know what others have done.
p.s. if you do have a spare knock sensor I will be happy to buy it.
knock sensor
Moderators: IMOC Moderators, IMOC Committee Members
Re: knock sensor
TCB sell various knock sensors for Toyotas, I'm pretty sure one of them will be the right one although none of them are listed for the 4A-GZE
Think it might be the QIC 916 although it's probably best to give them a call and check rather than ordering one blindly.
Think it might be the QIC 916 although it's probably best to give them a call and check rather than ordering one blindly.
Re: knock sensor
Thanks, just given tcb a call and are currently checking if it fits.
Re: knock sensor
TCB have said the QIC 916 knock sensor will not work as it has different frequency readings. They don't stock 4agze knock sensors.
But I have now got a second hand unit. (Hope it works) I am going to temp to fit this in on Sunday.
Can I ask if other have done this job what was required? Is it accessable under the car? Do I need to remove any items to get to the knock sensor. Any tips appreciated.
But I have now got a second hand unit. (Hope it works) I am going to temp to fit this in on Sunday.
Can I ask if other have done this job what was required? Is it accessable under the car? Do I need to remove any items to get to the knock sensor. Any tips appreciated.
Re: knock sensor
From memory it should be easy enough and accessible from underneath without removing anything although some contortion may be required, you should certainly be able to get the socket on, I just can remember how easy it is to find enough space to swing a ratchet. Oh and make sure you have a deep socket of the appropriate size, a standard socket won't cut it.
Also take care with the wiring/connector when unplugging the old one. Not sure if I've just been unlucky but all the GZE looms I've had have been particularly fragile in this area.
Also take care with the wiring/connector when unplugging the old one. Not sure if I've just been unlucky but all the GZE looms I've had have been particularly fragile in this area.
Re: knock sensor
Update: replacment knock sensor fitted and looks to have done the trick. I have a small coolent leak at the front so only took the car behind my house. Drives much much better and no engine light.
To confirm, 27mm deep socket used and a small extension. Found I had just about enough room.
Thanks for your help kaiowas
To confirm, 27mm deep socket used and a small extension. Found I had just about enough room.
Thanks for your help kaiowas
Re: knock sensor
could do with one myself!
Re: knock sensor
Let me dig around, I'm sure I have one somewhere.
Re: knock sensor
ive even crossed my balls in hope!
Re: knock sensor
Bank holiday bump!
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: knock sensor
Has anyone else got a spare?
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: knock sensor
I bought a GZE knock sensor second hand in the end. My mate who is also has a genuine white over silver JDM GZE aw11 had two spares as well. Not cheap.