My mirrors stopped retracting ages ago, anyway i decided to have a quick look, the module gets 12v to the pink wire when i press the retract button but apart from that doesnt seem to have any power
Anyone know which fuse this comes from, i havent actually tested any yet haha as it was late when i stopped, thought a post might save some time
I am assuming it is seperate from the normal mirror controls as they work fine, my bgb version doesnt have wiring diagrams for the retractors
Thanks
Graeme
[Mk2] [Generic] retracting mirrors
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: [Mk2] [Generic] retracting mirrors
This bit from the knowledge base should help: forums/kb.php?mode=article&k=92
Not a full wiring diagram though - I've never seen one for it either
Not a full wiring diagram though - I've never seen one for it either
Re: [Mk2] [Generic] retracting mirrors
Oh - the MR2OC version is much better and shows the plug's wiring: https://www.mr2oc.co.uk/know-your-2.htm ... bartid=223
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: [Mk2] [Generic] retracting mirrors
Sweet! Thavnks mate!
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: [Mk2] [Generic] retracting mirrors
Well as a follow up, the retracting mirrors are fed from the ecu-b fuse under the bonnet. Must be the only thing they feed on my car as it apparently feeds airbag and some say abs, of which I have none anyway.
Easy fix, should of looked ages ago haha
Easy fix, should of looked ages ago haha
Re: [Mk2] [Generic] retracting mirrors
Last edited by blogsy on Wed Feb 03, 2021 6:46 pm, edited 1 time in total.
Re: [Mk2] [Generic] retracting mirrors
Glad it proved to be an easy fix. But I thought I'd post a wiring diagram for folding mirrors here, in case it helps someone else in the future.
I came across this on a website early this year when I was having problems with converting mine to the folding type. In the end, in my case it just turned out to be a faulty relay.
Paul
I came across this on a website early this year when I was having problems with converting mine to the folding type. In the end, in my case it just turned out to be a faulty relay.
Paul
Re: [Mk2] [Generic] retracting mirrors
Thanks for posting that, Paul! I've stolen it and added it to the library I host here: http://shinny.co.uk/toyota/
A quick examination suggests to me there's a printing error on the diagram because the circuits for the left and right sides are different - pins 4 and 5 on the control relay look like they're flipped. Not sure if that's the wires or the innards
A quick examination suggests to me there's a printing error on the diagram because the circuits for the left and right sides are different - pins 4 and 5 on the control relay look like they're flipped. Not sure if that's the wires or the innards
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: [Mk2] [Generic] retracting mirrors
blogsy wrote:While you're here do you mind if i ask what sort of power are your running now, did you change over to the 5s block?
I switched to a 5s block a few years ago, I am running 630whp at the moment, so around 700+ crank hp, I'll put a link on my 5sgte thread to my latest video
Thanks for posting the drawing!
Graeme
Re: [Mk2] [Generic] retracting mirrors
wow that must surprise a few people on the street
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: [Mk2] [Generic] retracting mirrors
Yeh it does... Me lol
Re: [Mk2] [Generic] retracting mirrors
shinny wrote:Thanks for posting that, Paul! I've stolen it and added it to the library I host here: http://shinny.co.uk/toyota/
A quick examination suggests to me there's a printing error on the diagram because the circuits for the left and right sides are different - pins 4 and 5 on the control relay look like they're flipped. Not sure if that's the wires or the innards
Some useful stuff in your library, which I've now book marked. You may be right about the wiring diagram, I'll have to take a closer look. I'm afraid I can't for the life of me remember what site I found it on, but I think it was an American forum, and a Japanese speaker on that forum translated some of the text. I've not changed anything myself other than tidying up some of the labels. I ought to create an index on my own site of the various info I've collected and photos taken. It's just finding the time
Paul
If you want to nick my pdf version here's a link.
JDM Folding Mirrors