[FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Parts for the Mk2 MR2 only (excluding bodywork and wheels/tyres)

Moderators: IMOC Moderators, IMOC Committee Members

Locked
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

Going thou my unwanted parts ( I had to upgrade to the amount of inputs I need. Had to get a S6 + ) so this is up for grabs

From Aems Web site

http://www.aemelectronics.com/products/ ... nt-systems


AEM was the first company to offer complete engine control using a race vehicle's factory wiring harness and sensors. Our Series 2 Plug & Play EMS is a culmination of this original program. It combines robust construction with our proven AEMtuner Software to deliver total engine control.

AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (XP, Vista, 7) simplifies copying, viewing and data manipulation. AEMtuner software is infinitely adjustable. It allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately deliver proper amounts of fuel and correct ignition timing, for any boost level or operating condition.


Comes with software ect

Uses all the factory sensors
Includes start up calibrations
System is fully enabled and unlocked - Never pay for upgrades!
Context sensitive help eases tuning process
Maps can be password protected by the tuner to prevent unauthorized usage or sharing
Runs on Windows-compatible software
Tune using new USB communication port or serial port
Works with all AEM gauge


Compatible With

Electronic boost control
Full idle control
Programmable traction control
Software definable knock control
Two step launch control
User configurable soft-cut rev limiters
Wet or dry nitrous control

Spec

Up to 12 peak and hold injector drivers
Up to 8 direct-fire coil outputs
Up to 16 general-purpose outputs
Up to 8 definable switch inputs
Up to 4 EGT inputs with fuel trim
1MB of internal data logging



Had this in my car when I standard engine, Rogue CC, depeature pro exhaust made 280BHp 245wrhp :thumleft:

Looking to get £800 cost me 1.5k new so grab a bargain... phots to follow

many thanks Rich

Photos

Image

Image

Image

Image

Image

Image

Image
Last edited by rev2rich on Sat Apr 27, 2019 9:01 am, edited 2 times in total.
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

:thumleft: bump
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

still here will take some photos soon :thumleft:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

:whistle:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

still have this open to sensible offers :thumleft: :thumleft:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

:whistle:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

Sale fell thou... So still up for grabs ](*,)
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

Still got this.. Open to sensible offers on this :thumleft:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

Sale fell thou... This is for a plug and play rev2 car....


Offers welcome Rich
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

still have this and need it gone.... :thumleft:
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by rev2rich »

Still have ...... send me a offer as it only sits in my desk :evil:
mod-works
Posts: 1
Joined: Sun Jan 17, 2021 9:57 pm

aem

Post by mod-works »

Hi Rich, i could be interested.
please send me a private message if he is still available.
Thanks.
Feedback Bot
Posts: 6071
Joined: Wed Dec 15, 2004 10:16 am

Re: [FINALIZED] AEM Plug and play ECU for Rev2 V2 Photos Added

Post by Feedback Bot »

This Sale has been completed. The Buyer was mod-works
Locked

Return to “Mk2”