Brand NEW Toyota Connecting Rods SET include Bearings and Nuts

Parts for the Mk2 MR2 only (excluding bodywork and wheels/tyres)

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
C..S
Posts: 8
Joined: Sun Mar 29, 2015 2:45 pm

Brand NEW Toyota Connecting Rods SET include Bearings and Nuts

Post by C..S »

Hello Guys, for sell is a BRAND NEW Set of 4 13201-79425 Connecting Rod Set, lightly unpacked and again packed only for some Fotos.
They will FIT ALL 3SGTE each GEN1, GEN2, GEN3 because Toyota changed all Connecting Rods to 13201-79425 Number!
Replaces: 13201-79065, 13201-79095, 13201-79096, 13201-79195

Delivered 400 GBP Negotiation basis
Please feel free to contakt me per mail: [email protected] :thumleft:

Pictures:
Image
Image
Image
Image
Image
Last edited by C..S on Mon Jan 30, 2017 8:33 pm, edited 1 time in total.
androo007
Posts: 2363
Joined: Mon Mar 03, 2014 1:43 pm

Re: Brand NEW Toyota Connecting Rods SET include Bearings and Nuts

Post by androo007 »

Might want to reconsider price. Uprated eagle rods with arp bolts are £300 brand new.
C..S
Posts: 8
Joined: Sun Mar 29, 2015 2:45 pm

Re: Brand NEW Toyota Connecting Rods SET include Bearings and Nuts

Post by C..S »

I know this, therefore NEGOTIATION BASIS :wink:

1.) This rods are Original Toyota Parts INCLUDE BEARINGS, may be some guys want replace them as I did with my 13201-79096 Rods .(Oldtimer as my Carlos Sainz Edition should ONLY have original Parts).
2.) The 3sgte crankshafts are build for their weights:
That gives less torsional vibrations than with lighter rods.........
Vibration fractures of the crank can be a result, we have already seen at tuned 3SGTE engines.....Much Horsepower but low live time..........= more Money to rebuild.
This have much to do with the balancing ! Toyota knows better to build engines!
They are very precise in technic......dont forget this :!:
3.) Aftermarkets dont have a bore in the rod foot, which is a "MUST" for the oil supply to the cylinderwall and behind the Piston. As we know, forged Pistons allways have a little Piston tipping; with less oil wetting between cylinder and Piston skirt they are a little louder because less damping effect to the Piston skirt :!:
4.) This rods with an ARP Rod Bolt Set are good enough for 500 - 550 HP, without "good vibrations" to the crank, that you will not notice before the crank breaks...........
5.) Other rods are without delivery and without bearings 8-[

LINK TO LEARN:
:arrow: http://www.enginebuildermag.com/2014/06/replacing crankshafts-connecting-rods-bearings/

Everyone can make me an offer :thumleft:
C..S
Posts: 8
Joined: Sun Mar 29, 2015 2:45 pm

Re: Brand NEW Toyota Connecting Rods SET include Bearings and Nuts

Post by C..S »

Finalized, thanks for watching :wink:
Post Reply

Return to “Mk2”