rev1 turbo lump into a rev1 na. jdm. Help required please.

V6? V8? TDI? Discussion and technical advice for engine transplants inc. 5SFE & 5SGTE builds. Not for N/A to Turbo, or Rev1/2 to 3+ conversions.
Project and build threads welcome.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

I'm swapping out a rev1 turbo lump into a rev1 na. Both jdm so not UK spec.

Is there a walk through Or a thread available please as im having difficulties with a loom plug in the boot no longer marrying up.

I'm sure I will run into more difficulties.
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by alanmr2turbo »

just change the passenger side foot well loom the goes from front to back. You will also need the gear linkage cables.
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

Gear linkage cables?
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by alanmr2turbo »

Turbo gear linkage cables are different to n/a cables

Presuming you are using the turbo gearbox as well?
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

Yes I'm using turbo box. It's actually a jdm auto so looks like I will need to do the pedals also .

The cable you mention won't swap out? It's just a power cable. Doesn't appear to be a loom going to front?
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

My mistake.. It does have the loom.
I just swapped it out however there is a plug and socket by the ecu that won't marry up.


Image

Image


Image

Image
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by alanmr2turbo »

Yes that's the one. change it for a REV1 turbo. Get hold of the gear linkage cables before you put the engine in. So much easier to change when engines out....... i found out the hard way LOL

You have the turbo drive shafts, rear hubs and dash clocks?
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

Yes I have everything except turbo loom from passenger foot well to ecu

This must be the na loom.

Any ideas where to get one pls
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by alanmr2turbo »

MrTwos, may have one if not he knows a guy who can get hold of stuff pretty easily.

07812 506 772.
PW@Woodsport
Posts: 7642
Joined: Tue Dec 14, 2004 6:40 pm
Location: durham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by PW@Woodsport »

In 20 years i have yet to swap the kickwell loom on any turbo conversion, just repin the engine harness to suit, far less likelyhood of other issues occuring.

Also you can simply use the NA gear cables with the addition of a simple 12mm spacer on the gearbox cable bracket, no need to buy turbo cables.
Image
alanmr2turbo
Posts: 2238
Joined: Wed Nov 28, 2007 7:08 pm
Location: Birmingham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by alanmr2turbo »

PW@Woodsport wrote:In 20 years i have yet to swap the kickwell loom on any turbo conversion, just repin the engine harness to suit, far less likelyhood of other issues occuring.

Also you can simply use the NA gear cables with the addition of a simple 12mm spacer on the gearbox cable bracket, no need to buy turbo cables.


But he wants the easy way, not farting around with repinning, en asking which pins to repin and not making a brackets for cables lol

By the time you have repimmed the look I could have fitted the cable especially if you had to first find which ones to repin.
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

I'm fine with repining however no one has ever helped me out here..

A pin out would be epic guys please
PW@Woodsport
Posts: 7642
Joined: Tue Dec 14, 2004 6:40 pm
Location: durham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by PW@Woodsport »

alanmr2turbo wrote:
PW@Woodsport wrote:In 20 years i have yet to swap the kickwell loom on any turbo conversion, just repin the engine harness to suit, far less likelyhood of other issues occuring.

Also you can simply use the NA gear cables with the addition of a simple 12mm spacer on the gearbox cable bracket, no need to buy turbo cables.


But he wants the easy way, not farting around with repinning, en asking which pins to repin and not making a brackets for cables lol

By the time you have repimmed the look I could have fitted the cable especially if you had to first find which ones to repin.


Yeah, the problem with changing the kickwell loom is that it can induce a whole host of other faults, trust me on that, so while yes it gets the engine running without issue, you can end up with other electrical gremlins, this is a well known fact in the trade.

By all means swap the kickwell loom, it has every chance of being ok, but for me it's ten times easier to move a few pins and guarantee the cars chassis wiring remains the same.

The cable mod is just a simple 12mm spacer, no new bracket needs to be made, it's childsplay.
Image
PW@Woodsport
Posts: 7642
Joined: Tue Dec 14, 2004 6:40 pm
Location: durham
Contact:

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by PW@Woodsport »

Happy to help you via PM or email on the wiring, or if you're really stuck send me both the NA and turbo engine looms and i will make you a plug and play harness, no kickwell change needed.
Image
tubbychat3
Posts: 43
Joined: Sun Apr 17, 2016 8:02 pm
Location: east Anglia

Re: rev1 turbo lump into a rev1 na. jdm. Help required please.

Post by tubbychat3 »

Pm'd
Post Reply

Return to “MR2 Engine Swaps”