![](./images/smilies/spacer.gif)
Rev 4, just fitted a TD 3" DP, Fleabay intercooler, 9" fan/shroud.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
HKS EVC-S also installed by PO but not plumbed to turbo.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Put her on the rollers at TD completely stock and she rolled at 244bhp on a chilly morning.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
So, I fitted all the parts and went for a few spins in the car, it was boosting to just over 13psi, please note this was also the boost level attained before I fitted the DP/Intercooler.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
She seemed to run better and possibly pull a little more with the DP fitted.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Now I connected up the HKS to the turbo/WG.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
When I accelerate in say 3rd/4th/5th they turbo spools up at just over 3k, boost rises fast, but as soon as it goes over 10 odd psi the power delivery goes flat and slowly goes down to 8psi.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
I've trawled the web for preset settings for the EBC and are using settings similar to other 3S-GTE owners.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Next I electrically disconnected the T-VSV and went for another drive
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Is there anything else I need to do/disconnect etc??
![](./images/smilies/spacer.gif)
Tomorrow when I get home from work I'll reconnect the turbo/WG pipe and reconnect the T-VSV to reconfirm the car will boost to 13psi and hold it as it has done in the past.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Anyone have any thoughts on this??
![](./images/smilies/spacer.gif)
To rule out the EVC-S at fault should I try a cheap MBC?