That's not an easy question to answer. Car was off the road for about two years as I built a house, I seem to remember it running actuator pressure but can't be sure.
Major changes since are conversion to COP as well as some mods to my Jun intake. It has a link g4+ with timing set on the dunk using crank and cam sensors and a timing light.
Rev3 Turbo Overboosting help. *UPDATE* - DP off
Moderators: IMOC Moderators, IMOC Committee Members
Re: Rev3 Turbo Overboosting help. *UPDATE* - DP off
adam3442 wrote:That's not an easy question to answer. Car was off the road for about two years as I built a house, I seem to remember it running actuator pressure but can't be sure.
Major changes since are conversion to COP as well as some mods to my Jun intake. It has a link g4+ with timing set on the dunk using crank and cam sensors and a timing light.
Excessively retarded ignition timing can cause overboost like you're describing. If it wasn't doing this before and it is after substantial changes to the ignition system this may be a good place to look.
Re: Rev3 Turbo Overboosting help. *UPDATE* - DP off
Thanks bud, will also check that.
Re: Rev3 Turbo Overboosting help. *UPDATE* - DP off
So, car is back together, hasn't been test driven yet but timing checked and it's advanced by 5 degrees, this shouldn't be a massive issue when it comes to boost. And it hasn't been fully mapped yet.
We'll see if it still does the same on a drive.
We'll see if it still does the same on a drive.