Water neck hose inner diameter

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
almeida1234
Posts: 450
Joined: Sun Aug 15, 2010 12:48 am
Location: west sussex

Water neck hose inner diameter

Post by almeida1234 »

I am away at the moment so, can't get to the car.
Does anyone know the innner diameter of water neck hose.
Cheers
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: Water neck hose inner diameter

Post by pbmr2 »

not got the hose to hand but have a water neck, the metal output to the filler is 26mm.
almeida1234
Posts: 450
Joined: Sun Aug 15, 2010 12:48 am
Location: west sussex

Re: Water neck hose inner diameter

Post by almeida1234 »

Cheers bud
I am man hoping its same size for the tubing other end
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: Water neck hose inner diameter

Post by pbmr2 »

I'm working on the car over the weekend so I'll find the hose I took off and report back.

Fairly sure it's a single size, it's doesn't reduce. The replacement silicone hose was the same size both ends.
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: Water neck hose inner diameter

Post by pbmr2 »

found the original from my car.. the metal side from the water tree is 26mm, like posted before.
The silicone hose on mine is only 24mm ID and it's fitted to the plastic filler end. So 24mm ID fits and works.
almeida1234
Posts: 450
Joined: Sun Aug 15, 2010 12:48 am
Location: west sussex

Re: Water neck hose inner diameter

Post by almeida1234 »

Cheers bud
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”