I'm selling everything: both cars and all spares! Everything!!
Will have to come back and keep adding to this but to start with:
Supecharger rear lights with centre panel SOLD
Supercharger boot lid with brake light spoiler SOLD
Supercharger engine lid £200
Passenger front wing in very good condition £200
Alternator - little or never used £40
2 ecu's 1xmk1a 1xmk1b £25 each
Front bumper £50
Several black front grilles £10 each
Set of Rota GT3 wheels Black 16x7 SOLD
Pair of dark blue cloth seats very nice £200
Woodsport Tom's scoop never used/painted £75
Woodsport Buddy Club front lip never used/painted SOLD
Pair of T-bar glass panels in bags £75
Blue dashboard £25
Blue cubby box £25
Several driver side a-pillar trim SOLD
MOMO tuner steering wheel black leather boxed unused £125
I have a bag of new powerflex polybushes including steering rack - almost a complete set. £100
That's what I can remember right now. I have several crates of smaller parts - lights, motors, relays, bonnet badges etc.
I need to sort everything but I have some new service parts, full set of discs & pads plus braided hoses, a 4agze, a 6 speed box, 4agze spare air flow meter, a stainless exhaust system...
Most things are in Watford or Bedford, some will be in Durham. Collect or maybe I can drop off. I do a lot of driving so worth asking.
UPDATE -new parts found
Supercharger flare panel £35
New 4agze rotor arm £12
Bonnet badges x3 £SOLD
New cv boot kit x2 £10 each
Steering boot kit £10
Genuine TRD rad caps x2 bought myself in Japan £25 each
Used but mint TRD leather ball gear knob £20
Nardi steering whell with boss £60
Clear side indicators new with bulbs £25
2 new oil filters, 1 new fuel filter, 1 new thermostat £20 the lot
Full set of new discs & pads plus braided hoses.
Pads are Pagid, one set of discs are Pagid, one Blueprint, hoses are Mtec.
£150 the lot.
I have a load of enamelled suspension parts. Look great. Message for photos.
Lots of MK1 parts
Moderators: IMOC Moderators, IMOC Committee Members
Lots of MK1 parts
Last edited by Kumakun on Fri Sep 08, 2017 6:05 am, edited 5 times in total.
1988 MR2 MK1B - MK1.5 (in progress)
1989 MR2 MK1B
1989 MR2 MK1B
Re: Lots of MK1 parts
Hi, do you have a 4agze alternator.
4agze alternator
Are they different?
I have the one still with my engine but can't split the package. Sorry
I have the one still with my engine but can't split the package. Sorry
1988 MR2 MK1B - MK1.5 (in progress)
1989 MR2 MK1B
1989 MR2 MK1B
Re: Lots of MK1 parts
Can you put up colour of items, such as front bumper
I am going to live forever, or die trying!
Body parts
Apart from the new Woodsport bits I'd say everything else would not be good enough to go straight on a car.
The wings are red but almost matte.
The bumper is scratched mica blue.
The sc engine lid is white with stickers.
The boot lid is grey and scratched.
The wings are red but almost matte.
The bumper is scratched mica blue.
The sc engine lid is white with stickers.
The boot lid is grey and scratched.
1988 MR2 MK1B - MK1.5 (in progress)
1989 MR2 MK1B
1989 MR2 MK1B
Re: 4agze alternator
Kumakun wrote:Are they different?
I have the one still with my engine but can't split the package. Sorry
I am sure they are different. The 4agze has a external regulator.
Just notice you got a 6 speed box. Any more info on that. Is it one of Paul's builds. With or with out LSD.
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: Lots of MK1 parts
im interested in the spare AFM you have...
I'll be in Teesside week after next so maybe if it's up there I can come and collect? And interested in the scoop too
I'll be in Teesside week after next so maybe if it's up there I can come and collect? And interested in the scoop too
Re: Lots of MK1 parts
Im interested in the nardi wheel and boss. Could you post a picture or I can pm you my number.
Thanks
Thanks
4agze & 6-speed box
I'm now opening up the chance to buy my 4agze. Ideally contact me for further details but in brief:
Complete 4agze with all ancillaries. However, the sc12 is knackered. I have a replacement with a friend in Japan or a good opportunity to upgrade with an SC14, Eaton or small turbo.
The engine has covered 70k miles. All ignition parts are new including leads & coil. It has the big pulley mod for higher boost.
I had a new 6 speed box built by Woodsport and added a stage 2 clutch - both have covered just 500 miles. 4age flywheel also supplied.
I will also include a spare Air flow meter.
This whole lot cost me £2800. Any offers around £1800? Plus shipping for the SC12 (from Japan) if you want it. (I estimate £70-100).
Complete 4agze with all ancillaries. However, the sc12 is knackered. I have a replacement with a friend in Japan or a good opportunity to upgrade with an SC14, Eaton or small turbo.
The engine has covered 70k miles. All ignition parts are new including leads & coil. It has the big pulley mod for higher boost.
I had a new 6 speed box built by Woodsport and added a stage 2 clutch - both have covered just 500 miles. 4age flywheel also supplied.
I will also include a spare Air flow meter.
This whole lot cost me £2800. Any offers around £1800? Plus shipping for the SC12 (from Japan) if you want it. (I estimate £70-100).
1988 MR2 MK1B - MK1.5 (in progress)
1989 MR2 MK1B
1989 MR2 MK1B
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: Lots of MK1 parts
Food for thought mate- I bought a complete 4AGZE engine in April for £500 with 60k miles.
Would you sell the AFM separately?
Would you sell the AFM separately?
4agze
So you got lucky... try finding another for £500 or any for sale.
Mine is complete with a 6 speed, clutch and flywheel. That's £1200 alone...
I'm not selling anything separately. It's best left together
Mine is complete with a 6 speed, clutch and flywheel. That's £1200 alone...
I'm not selling anything separately. It's best left together
1988 MR2 MK1B - MK1.5 (in progress)
1989 MR2 MK1B
1989 MR2 MK1B
supercharger engine lid
Hi,
Is the supercharger engine lid still for sale? Picture?
greetings
Michael
Is the supercharger engine lid still for sale? Picture?
greetings
Michael
Re: Lots of MK1 parts
Hi, I am about to have new bearings fitted on my MK1.5 at the rear. I have Celica ST brakes on the front but standard on the rear. The rear brakes need new disks and pads. Is there a price for just the rear pads and disks.
Still have the standard engine lid (but with SC lights) so may be interested in engine lid if available.
Thanks
Still have the standard engine lid (but with SC lights) so may be interested in engine lid if available.
Thanks
Re: Lots of MK1 parts
Do you have a good condition rear hub for a mk1b?
Re: Lots of MK1 parts
Is your engine still for sale?