Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Cars being broken - please contact a member of the Committee or a Moderator before posting.

Moderators: IMOC Moderators, IMOC Committee Members

gavsdavs
Posts: 702
Joined: Thu Nov 15, 2012 2:31 pm
Location: saahfeeeeastlaandun

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by gavsdavs »

Hi there, Is this still being broken, after the air con pipes from under the car (providing its an R12 car)
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by pbmr2 »

Still parts left?

I'm after a non-ABS bias valve (plus the hard lines from the master if they are not damaged) do you have one?
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

Sorry for the late replies.

The only bits left are those listed on the first page, everything else is sold or went with the car.
spencerc
Posts: 64
Joined: Wed Jun 25, 2014 6:37 am
Location: Buckinghamshire

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by spencerc »

what condition is the frunk in? I need a section cut from a car so I can have it welded in
Adam Webber
Posts: 7
Joined: Fri Sep 15, 2017 12:48 pm

Gearbox

Post by Adam Webber »

Hi. Is the LSD gearbox still for sale? Cheers
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

spencerc wrote:what condition is the frunk in? I need a section cut from a car so I can have it welded in


Sorry for the late reply.

The chassis went at the time the parts were all removed. The only bits left are what's listed on page 1.
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Gearbox

Post by Magic Beans »

Adam Webber wrote:Hi. Is the LSD gearbox still for sale? Cheers


It's sold, sorry.
Adam Webber
Posts: 7
Joined: Fri Sep 15, 2017 12:48 pm

Re: Gearbox

Post by Adam Webber »

Magic Beans wrote:
Adam Webber wrote:Hi. Is the LSD gearbox still for sale? Cheers


It's sold, sorry.


No worries thanks for letting me know.
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

:thumleft:
y2kyo
Posts: 19
Joined: Wed Sep 20, 2017 7:13 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by y2kyo »

interested in gearbox and exhaust, i just put a wanted advert up for an exhaust
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

y2kyo wrote:interested in gearbox and exhaust, i just put a wanted advert up for an exhaust


The gearbox is long sold. The exhaust, however, I do still have :)

The ad for it is here: http://www.imoc.co.uk/forums/viewtopic.php?t=192733
Maslalt
Posts: 31
Joined: Sat Apr 04, 2015 8:50 pm
Location: Lithuania

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Maslalt »

Hello need turbo exhaust manifold. Have it?
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

Sorry, it went with the engine.

The only bits left are as shown on the first page.
alan_uk
Posts: 1851
Joined: Sun Aug 12, 2012 12:25 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by alan_uk »

rear arms poly bushed ?


will they fit a rev5 uk to rev3 turbo swapped car ?
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

alan_uk wrote:rear arms poly bushed ?


will they fit a rev5 uk to rev3 turbo swapped car ?


From memory they were poly'd, I'll let you know later today. They're down at Pete's, who has been away all week. He's going to check when he gets back.

They should fit a Rev 3+ as I believe it was only the Rev 1 that had a different subframe.
alan_uk
Posts: 1851
Joined: Sun Aug 12, 2012 12:25 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by alan_uk »

Magic Beans wrote:
alan_uk wrote:rear arms poly bushed ?


will they fit a rev5 uk to rev3 turbo swapped car ?


From memory they were poly'd, I'll let you know later today. They're down at Pete's, who has been away all week. He's going to check when he gets back.

They should fit a Rev 3+ as I believe it was only the Rev 1 that had a different subframe.


Thanks mate 100% interested :)
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

Pete’s checked the arms. They aren’t poly’d I’m afraid :|
alan_uk
Posts: 1851
Joined: Sun Aug 12, 2012 12:25 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by alan_uk »

Magic Beans wrote:Pete’s checked the arms. They aren’t poly’d I’m afraid :|


All in good condition though ? And 100% fit rev5 shell rev3 turbo ?

I could powder coat them and fit bushes thats all
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Rev 2 Turbo in red (3E6), with a sea of go faster bits on it

Post by Magic Beans »

There’s surface corrosion, as you’d expect. A good wire brushing and powder coat would see them right.

Here’s a couple of shots Pete took: https://flic.kr/p/GHgTTx

Anything Rev 2+ will fit, it was only the Rev 1 subframe that was different :)
Post Reply

Return to “MR2s Being Broken”