[FINALIZED] CR Racing/ PWR Barrel Cooler

MR2 related parts for sale that are not for a specific Mk

Moderators: IMOC Moderators, IMOC Committee Members

Locked
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

CR Racing/ PWR Barrel Cooler

Post by rev2rich »

I am coming to the end of build and some goodies have not been used so this is up for grabs

6"x 6" core size Barrel cooler made buy CR racing which is a part of the PWR group ( sold in the U.S )

Link to their site
https://www.crracing.com/barrel_interco ... nletoutlet


I was going down the normal route of boot mount set up but decided I would try and save as much as the boot as possible so the car could carry some thing rather than being completely impractical (trying not to lose argument with my wife lol )

Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm


Photos

Image

Image

Image

Image



Condition
Overall Good but a few marks on it as it is aluminum it is easy to mark.. could be buffed out if you spent some time on it

Price
I am asking for £200 on IMOC and £250 On ebay I think this is a good price + P&P

Thank you for looking Richard
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »

:whistle: bump
Gullzter
Posts: 2844
Joined: Wed Feb 27, 2013 1:04 am
Location: Glasgow

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by Gullzter »

Surprised this thing is still hanging about, I've got the bigger one and it works a treat.. Top range stuff right there for not a lot of money!
doeboy
Posts: 319
Joined: Mon Apr 11, 2005 9:29 pm
Location: milton keynes

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by doeboy »

Hi what sort of power can this support please?
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »

I was going for about 400 ish....
doeboy
Posts: 319
Joined: Mon Apr 11, 2005 9:29 pm
Location: milton keynes

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by doeboy »

Is I the same as the pwr 6x6?
As this states it's good for 525bhp
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »


Is I the same as the pwr 6x6?
As this states it's good for 525bhp


Yes it is the same but..

I never truly believe in numbers on these items as you never know how they get to that number.... was it on a dyno.. what car was it on...what time of year ect so I got it for my 400 build

Hope that helps
doeboy
Posts: 319
Joined: Mon Apr 11, 2005 9:29 pm
Location: milton keynes

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by doeboy »

I've Ben looking at the 6x6 for my build, I'm aiming for around 500bhp on high boost, but need my engine in before I decide finally, that won't be till mid January all being well so if it's still around and works for me I will be in touch.
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »

:whistle:
Essex2Visuvesi
Posts: 261
Joined: Wed Jun 08, 2016 6:46 pm
Location: Witham, Essex

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by Essex2Visuvesi »

Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »

PostPosted: Sun Jan 08, 2017 11:38 am Post subject:
Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?




Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm

The water inlet is a push fitting not threaded :thumleft:
Essex2Visuvesi
Posts: 261
Joined: Wed Jun 08, 2016 6:46 pm
Location: Witham, Essex

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by Essex2Visuvesi »

rev2rich wrote:
PostPosted: Sun Jan 08, 2017 11:38 am Post subject:
Couple of questions:-

What it is the overall length?
What size threads are the water hose fittings?




Size Dimensions

Inlet - 3 inch - 76 mm
water Inlet - half inch ID - 20mm OD
Core - 6" x 6" - 150 mm x 150 mm
Total length - 15" - 38 cm

The water inlet is a push fitting not threaded :thumleft:



Thanks for that.... to long for my needs :(
rev2rich
Posts: 519
Joined: Thu Dec 17, 2009 4:43 pm

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by rev2rich »

Still have this... open to offers as I need the room :thumleft: :thumleft:
doeboy
Posts: 319
Joined: Mon Apr 11, 2005 9:29 pm
Location: milton keynes

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by doeboy »

My engine should be in next week so I'll have a idea if this'll work for me by then.
Feedback Bot
Posts: 6071
Joined: Wed Dec 15, 2004 10:16 am

Re: [FINALIZED] CR Racing/ PWR Barrel Cooler

Post by Feedback Bot »

This Sale has been completed. The Buyer was tehdub
Locked

Return to “Parts for Sale (not Mk-specific)”