Distributorless ignition/COP for Power FC & Gen3 ECU (3nd batch)

Forum For IMOC Group Buys

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
NoddE
Posts: 114
Joined: Tue Dec 21, 2010 9:47 pm

Distributorless ignition/COP for Power FC & Gen3 ECU (3nd batch)

Post by NoddE »

Buyers:
Joshua (MR2OC)
Dantical (IMOC)


I had 5 PCB left over and these are now ready as well.
I will however make this slightly different.
Boxes are ready but not the harnesses.
Reason for this is that im working on getting these boxes to work with coils with built in igniters (1ZZ coils etc).
When i get a confirmation from one of the customers that was willing to try this then its a go.
I will however still make the other kit as well including the harness and igniter brackets etc on request.
Links to the other buys with information:

http://www.imoc.co.uk/forums/viewtopic.php?t=166890

http://www.imoc.co.uk/forums/viewtopic.php?t=145238

Price is still 295 usd incl shipping for the "complete kit".

Price for just the box is 195 incl shipping and this is meant to go with 1ZZ coils etc (coils with built in igniters), meaning you dont need any extra igniter or harnesses, except the wiring to the coils which you do yourself.
NoddE
Posts: 114
Joined: Tue Dec 21, 2010 9:47 pm

Doing a final batch!

Post by NoddE »

Ive had a few interested in my kit during the past 6 month so im trying to get 5 people in on this to make it happen.
2 have already paid.

This kit is the new one where you use 1zz coils instead of motorcycle coils and a supra igniter.

The box that converts the oem ignition signals to sequential distributorless signals is 190 usd incl shipping.
You then need som wires and a coil kit. Preferable the kit that racer x in usa sells.

Let me know if anyone is interested.

Regards
Jimmy
tiff_lee
Posts: 384
Joined: Thu Jun 04, 2015 2:18 pm

Re: Distributorless ignition/COP for Power FC & Gen3 ECU (3nd batch)

Post by tiff_lee »

I'm in on this buy and tbh i'm surprised there isn't more interest for a 'bolt on' distributorless ignition kit.
kirk
Posts: 413
Joined: Sun May 10, 2015 3:43 pm

Re: Distributorless ignition/COP for Power FC & Gen3 ECU (3nd batch)

Post by kirk »

Pictures of the kit and when installed?
mr2magic
Posts: 643
Joined: Fri Apr 09, 2010 9:33 am
Location: Hannover, Germany

Re: Distributorless ignition/COP for Power FC & Gen3 ECU (3nd batch)

Post by mr2magic »

There's probably not more interes because it's not really useful on a stock engine. Unless you're changing plugs, cap and rotors every few months instead of every few years then the cost of purchasing and installing COP is greater than sticking to the standard system.

When going standalone I would always upgrade.
Post Reply

Return to “Group Buys - MR2 related”