[FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Moderators: IMOC Moderators, IMOC Committee Members

Locked
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

I currently have a set of ROTA GR-A 17" alloys fitted to my car but fancy a bit of a change so they are up for swaps/sale.

The alloys are in very good condition, are straight and true and I use them on my daily driver. They have the usual very light kerb rash around the outside (I will try to get photos shortly - this isn't obvious I'm just trying to be honest). They suit the curves of the MR2 perfectly and IMHO these are in the best original colour - gunmetal/steel grey.

These wheels used to sell between £180-210 new per alloy (excluding tyres or delivery). They have been discontinued in the 17" format for several years now making them a bit tricky to get hold of. They are quite lightweight wheels and will fill your arches nicely especially if your lowered.

The front tyres still have plenty of tread to them and the rears are basically new having only covered a maximum of 7-800 miles since new. Rear tyres are running on 235/40/ZR17 and the fronts are 215/40/ZR17.

I've custom made centre caps for the wheels which set them off perfectly. These are included in the sale and make the wheels look more OEM.

I will let the photos do the talking :mrgreen:

http://www.rotawheels.com/wheel.php?id=31

Image

Image

Image

Image

Image

Image

£475 excluding delivery
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

I've just bought a set of wheels which are on their way to me, therefore I need cash to cover the bank balance following my spending...

HAVING A HUGE PRICE REDUCTION JUST TO COVER MY COSTS!!!

These are therefore now up for only £300 collection or courier at your own cost... Very good condition alloys and tyres with lots of tread: COMPLETE BARGAIN!!

I will even include the TITAN RACING slimline tuning nuts at this price if they are bought/paid for today :thumleft:
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

Bump... Reasonable offers considered :thumleft:
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
smig
Posts: 66
Joined: Wed Jun 11, 2008 10:19 pm
Location: Derbyshire

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by smig »

What are the widths and offsets of the wheels?
What make/model are the tyres?
Can you add pics of the kerbing?
Do the wheels rub the arches etc?
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

smig wrote:What are the widths and offsets of the wheels?
What make/model are the tyres?
Can you add pics of the kerbing?
Do the wheels rub the arches etc?


I don't have the width and offset details to hand as I'm not at home at the moment... They will be in the link just above my pictures though :thumleft:

What I will say is that I have no spacers on the front and they are perfect fitment and fill the arches perfectly as seen from the photos. The rears aren't as flush to the arches naturally. I have mine on 20mm hubcentric spacer and that brings them out to the side of the arches perfectly.

The tyres are Toyos on the front and basically brand new Nexans on the rear.

I will add photos of the kerbing when I can (probably tomorrow). It is very very light kerbing on a couple of the alloys - it's not at all noticeable and I only mentioned it to be completely honest.

There is absolutely no rubbing on the arches :thumleft:

Feel free to ask any other questions or try me with an offer.
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

Forgot to add - when I remove the wheels on the 20th I will pressure wash them. I will then polish and wax the alloys and fully dress they tyres so they will be like new :thumleft:
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by KarlBristol »

Deposit received :thumleft:
Sold pending full payment on the 21st
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
Feedback Bot
Posts: 6071
Joined: Wed Dec 15, 2004 10:16 am

Re: [FINALIZED] 17" ROTA GR-A Gunmetal Alloys - ***HUGE PRICE REDUCTION!!!***

Post by Feedback Bot »

This Sale has been completed. The Buyer was only1jules
Locked

Return to “Mk2 Bodywork & Wheels ”