Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Moderators: IMOC Moderators, IMOC Committee Members
- toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Well, they need spacing out from the horn mounting points, with longer bolts and nuts which haven't been provided. But more to the point mine don't line up with those bolt holes
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
- toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Pictures speak a thousand words. I've emailed these to Ed with some suggestions for improvements, but I thought I'd show you guys too.
Ed's suggestion was that the tops of the brackets need spacing out with longer bolts, which makes sense except I don't think the brackets are quite long enough to do that (aside from the driver's side one that I've got being on the p1$$).
Ed's suggestion was that the tops of the brackets need spacing out with longer bolts, which makes sense except I don't think the brackets are quite long enough to do that (aside from the driver's side one that I've got being on the p1$$).
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
So where are we with this now? Will they fit with longer bolts on the top, do we all have to resend our address?
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
I've just emailed Ed with my address, he replied saying his hoping to post them out tomorrow.
He also said he is still missing one (possibly two) addresses, so if you haven't emailed him yet then now would be a good time to do so!
He also said he is still missing one (possibly two) addresses, so if you haven't emailed him yet then now would be a good time to do so!
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Has everyone had the brackets yet? Sent my address but nothing has come yet
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
I received my brackets this morning
Group Buy Gauging Interest Chargecooler Radiator Brackets UPDATED
ssc_thomas: i also pmed everyone from the last group buy a few still havent seen the pm though.
SRTminime: i would deff. be interested in what he has to say.
1: monday
2: SRTMiniMe
3: UnknownCoatings
4: REKIII
5: Spoo76 ?
6: ssc_thomas
7: Matt Tripp
8: nosdneon
9: SRTMiniMe
10:
SRTminime: i would deff. be interested in what he has to say.
1: monday
2: SRTMiniMe
3: UnknownCoatings
4: REKIII
5: Spoo76 ?
6: ssc_thomas
7: Matt Tripp
8: nosdneon
9: SRTMiniMe
10:
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Hi folks. I haven't been on much recently.
Has everyone got their brackets now? Do they fit OK? I have mine but am miles away from trying them as things stand.
Has everyone got their brackets now? Do they fit OK? I have mine but am miles away from trying them as things stand.
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
bluesmoke wrote:Hi folks. I haven't been on much recently.
Has everyone got their brackets now? Do they fit OK? I have mine but am miles away from trying them as things stand.
+1
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Any updates from anyone who has their brackets?
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
Did anyone fit the brackets in the end?
I finally got around to trying them at the weekend, not very impressed with the fitment.
The brackets are too short so the top holes don't line up with the horn mounting points. Also the cut out for the bleed point on the Fiat rad is too small.
The brackets will need quite a bit of work to make the fit properly, too much for me, so I've ordered the Radtec radiator from Rogue instead.
I finally got around to trying them at the weekend, not very impressed with the fitment.
The brackets are too short so the top holes don't line up with the horn mounting points. Also the cut out for the bleed point on the Fiat rad is too small.
The brackets will need quite a bit of work to make the fit properly, too much for me, so I've ordered the Radtec radiator from Rogue instead.
- toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
I sold mine with my car!
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
Re: Group Buy - Gauging Interest - Chargecooler Radiator Brackets - UPDATED
I'll probably use mine as shelf brackets for the garage