Distributorless Ignition (COP) for Power FC/Gen3 ECU

Forum For IMOC Group Buys

Moderators: IMOC Moderators, IMOC Committee Members

NoddE
Posts: 114
Joined: Tue Dec 21, 2010 9:47 pm

Re: Distributorless Ignition (COP) for Power FC/Gen3 ECU

Post by NoddE »

Ok, just talked to "slipping clutch" a guy in Russia, he has done 2000 km now on a PFC with OEM Gen3 Dwell times without any problems.
I dont think there is any problems at all running with gen3 dwell.

The oem single coil handles overcharging all the time with 4 times less dead time between each charge as it is a single coil.

At higher rpm the oem dwell is the same as what i recommend for the Denso coils.

Also the Igniter has built in current limiting system so the coils will not see to much current either which helps keeping coils from frying.

/Jimmy
NoddE
Posts: 114
Joined: Tue Dec 21, 2010 9:47 pm

Re: Distributorless Ignition (COP) for Power FC/Gen3 ECU

Post by NoddE »

Only one kit left now!
Post Reply

Return to “Group Buys - MR2 related”