Replacing headlight unit or bulb

Description:

Categories: MR2 Mk2 Articles -> Electrical

Link to this article: Select all

[url=https://imoc.co.uk/app.php/kb/viewarticle?a=80&sid=ed071ef4eba45d3ce40367f81ffec863]Knowledge Base - Replacing headlight unit or bulb[/url]

Tools required:
Cross-head screwdriver.

The headlight bulbs the H4 type, they are dual filament bulbs for both dipped and high beam. They look like this…
Image

First, switch your headlights on, then twist the stalk back to the 2nd position so the headlights are switched off but remain in the pop up position.

Now you need to remove the black shroud, 2 screws here…
Image

Followed by another 2 screws on the opposite side…
Image

Now carefully remove the shroud out of the way…
Image

Now you have access to the metal trim that is holding the headlight unit in place, remove the 2 screws at the top and the 2 at the bottom…
Image

With the metal trim removed, carefully ease the headlight unit forwards so you can unplug it from the back…
Image

This is the headlight removed from the car…
Image

Now carefully remove the rubber (it just pops off) and you can unclip the old bulb for the new one to go in…
Image

Re-fitting is the reverse of the above instructions.