DIY Camber Angle Finder / Alignment

Description:

Categories: General

Link to this article: Select all

[url=https://imoc.co.uk/app.php/kb/viewarticle?a=141&sid=ac8e7290ee2944d52ea8fcd30b8167cd]Knowledge Base - DIY Camber Angle Finder / Alignment[/url]

Added by request of the author Bill Hulme....

DIY CAMBER ANGLE FINDER / ALIGNMENT

INSTRUCTIONS FOR MAKING AND USING A CAMBER ANGLE FINDER

This camber angle finder/gauge is based on an angle finder which may be purchased at B&Q or Machine Mart for around £8. With a few simple modifications and a spirit level it can be used to check and set the camber angle on certain cars where it is possible to adjust the camber angle, including Toyota MR2s, and Corollas.

Image

Picture 1 shows the angle finder/gauge with the necessary fittings attatched. A small normal spirit level may be used, but it is more convenient to stick one to the gauge, as has been done in the illustration.

Image

Picture 2 shows the gauge in use to check the camber angle without removing the wheel. The car needs to he on level ground and the wheels in the straight ahead position. The top bar rests on the top centre of the tyre while the lugs locate on the rim. The spirit level should be levelled and will then give a reading of the camber angle in degrees.


Image

Picture 3 shows the gauge hanging on the wheel to show how it fits against the wheel rim.

Image

Picture 4. With the car jacked up and the suspension hanging, the wheel is removed and the gauge is bolted to the wheel hub. Take a new reading with the spirit level, noting the new degrees. If the angle needs to be altered, change the angle mark to the degree you require and use the adjuster on the car to return the spirit level to level.

Image
Image
Image

Pictures 5, 6 and 7 show the components that need to be made to modify the angle finder for this purpose. With careful use, it is possible to set an angle accurately to ¼ of a degree.

Image

NB The tracking may need re-setting following an adjustment to the camber angle.

Bill Hulme