clutch bleeding the easy way...

Description:

Categories: MR2 Mk2 Articles

Link to this article: Select all

[url=https://imoc.co.uk/app.php/kb/viewarticle?a=128&sid=146abe09344fe0bc93e7d90fd6d2eba7]Knowledge Base - clutch bleeding the easy way... [/url]

right... no need for easybleed or suction or anything,

just you and a friend.. 3 if possible to make sure the fluid level never gets too low.

right, here we go!

firstly, fill up the resavour (sp**)

undo the union on the bulkhead to bring the fluid into the clutch line. as soon as you see fluid, close the union and move onto the back of the car.

open bleed nipple on the slave cylinder and have a friend lower the clutch pedal slowly, close nipple and repeat.. pump the pedal between bleeding.

when you start to see fluid coming out, close the bleed nipple and lift pedal.. then open the nipple, push slave cylinder in and have friend lower pedal... close nipple and repeat... you shouldnt have to do this more than 3 times...

pump pedal between bleeds to make sure your gaining pedal feel.. if not then there is something wrong with either your master or slave cylinders

good luck 8)