Fitting K&N Induction Kit
Description:
Categories: MR2 Mk2 Articles -> Engine
Link to this article: Select all
[url=https://imoc.co.uk/app.php/kb/viewarticle?a=1&sid=8f2b65fa823879563da5b98abe823370]Knowledge Base - Fitting K&N Induction Kit[/url]
1) Find your engine bay. (The easy part)
2) Remove side cover (two screws), as this provides much greater access.
3) Remove what I call top chamber (one screw).
4) Remove breather point.
5) Remove side chamber (one screw).
6) Remove hose (one clip, top circle).
7) Remove air filter box and air filter(4 clips & 3 bolts).
Remove final part (3 blots, and bloody awkard too!!!).....look at all those unwanted bits!!!
9) Fit new hose.
10) Breather reattached.
11) Insert added and tightened.
12) Filter attached.
13) Cold air intake.
14) Attached cold start temp filter into hole in side of the cone base.
15) Reattach side cover.
16) Start up engine...and expect a slight whistle at low-revs. But floor it and expect a deep roar!!!!