Fitting K&N Induction Kit

Description:

Categories: MR2 Mk2 Articles -> Engine

Link to this article: Select all

[url=https://imoc.co.uk/app.php/kb/viewarticle?a=1&sid=00b3de2114c89815d4224d29980249b5]Knowledge Base - Fitting K&N Induction Kit[/url]

1) Find your engine bay. (The easy part)
Image

2) Remove side cover (two screws), as this provides much greater access.
ImageImage

3) Remove what I call top chamber (one screw).
ImageImage

4) Remove breather point.
Image

5) Remove side chamber (one screw).
ImageImage

6) Remove hose (one clip, top circle).
ImageImage

7) Remove air filter box and air filter(4 clips & 3 bolts).
ImageImage
ImageImage

8) Remove final part (3 blots, and bloody awkard too!!!).....look at all those unwanted bits!!!
ImageImage

9) Fit new hose.
Image

10) Breather reattached.
Image

11) Insert added and tightened.
ImageImage

12) Filter attached.
Image

13) Cold air intake.
ImageImage

14) Attached cold start temp filter into hole in side of the cone base.
ImageImage

15) Reattach side cover.
Image

16) Start up engine...and expect a slight whistle at low-revs. But floor it and expect a deep roar!!!!